Rail-to-Rail I/O Op Amps
EVALUATION KIT AVAILABLE
MAX9636/MAX9637/MAX9638
3V/5V Low-Power, Low-Noise, CMOS, Rail-to-Rail I/O Op Amps
General D...
Description
EVALUATION KIT AVAILABLE
MAX9636/MAX9637/MAX9638
3V/5V Low-Power, Low-Noise, CMOS, Rail-to-Rail I/O Op Amps
General Description
The MAX9636/MAX9637/MAX9638 are single-supply, CMOS input op amps featuring wide bandwidth at low quiescent current, making them suitable for a broad range of battery-powered applications such as portable medical instruments, portable media players, and smoke detectors. A combination of extremely low input bias currents, low input current noise and low input voltage noise allows interface to high-impedance sources such as photodiode and piezoelectric sensors.
The ICs feature a maximized ratio of gain bandwidth (GBW) to supply current. The devices operate from a single 2.1V to 5.5V supply at a typical quiescent supply current of 36µA. For additional power conservation, the MAX9636 and MAX9638 offer a low-power shutdown mode that reduces supply current to 1µA and places the amplifiers’ outputs into a high-impedance state.
The ICs are specified over the automotive operating temperature range (-40°C to +125°C). The single is offered in a space-saving, 6-pin SC70 package, while the dual is offered in tiny, 8-pin SC70 and 10-pin UTQFN packages.
Applications
Portable Medical Instruments
Piezoelectric Transducer Amplifiers
Smoke Detectors
Battery-Powered Devices
Transimpedance Amplifiers
Tablets
Benefits and Features
S Ideal for Precision Transimpedance Amplifier Applications Ultra-Low 0.1pA Bias Current Wide 1.5MHz Bandwidth Low Input Current-Noi...
Similar Datasheet