DC-DC Step-Up Converter
SP1938
DC-DC Step-Up Converter for White LED
DESCRIPTION The SP1938 is a step-up DC/DC converter for white LED driver w...
Description
SP1938
DC-DC Step-Up Converter for White LED
DESCRIPTION The SP1938 is a step-up DC/DC converter for white LED driver with over voltage protection. The device can driver one to four LEDs in series from a single cell Lithium Ion battery. Internal functions include current limiting; thermal shutdown; OVP and soft-start to prevent damage operate status. The SP1938 operates at 0.8MHz apply to Lithium-Ion powered systems. A low 95mV reference voltage minimizes power loss in the current setting resistor for better efficiency.
The SP1938 is available in small package SOT-23-6L.
APPLICATIONS Battery Power Equipment Notebook Computers PDA Cellular Phone
FEATURES Current Source with Over Voltage Protection Fast 0.8MHz Switching Frequency High Efficiency up to 87% Drives up to Four LEDs From 3.2V Supply Drives up to Six LEDs From a 5V Supply Low Quiescent Current Disconnects LEDs in Shutdown Mode Internal Over Temperature and Current Limiting
Shutdown Function Internal Soft-Start Circuit 26V Rugged Bipolar Switch
Available in a Small SOT-23-6L Package
PIN CONFIGURATION(SOT-23-6L) PART MARKING
2020/07/08 Ver 6
Page 1
SP1938
DC-DC Step-Up Converter for White LED
TYPICALAPPLCATION CIRCUIT
PIN DESCRIPTION
Pin
Symbol
1
SW
2
GND
3
FB
4
SHDN
5
OVP
6
VIN
Description Connect inductor/diode here Ground Pin Connect cathode of lowest LED and resistor here
Combined active low enable and PWM control pin for LED dimming Over voltage Protection and C...
Similar Datasheet