DatasheetsPDF.com

VCS1026 Dataheets PDF



Part Number VCS1026
Manufacturers CTS
Logo CTS
Description 622.080MHz VCSO
Datasheet VCS1026 DatasheetVCS1026 Datasheet (PDF)

VCS1026 FEATURES • Industry Standard 5x7mm SMT Footprint • +3.3 Vdc Supply Voltage • -40°C to 85°C Temp. Range • LVPECL differential outputs • ± 50ppm Absolute Pull Range (APR) • Output Enable/Disable Function • SAW resonator • Extremely Low Jitter • Tape & Reel Packaging • RoHS Compliant DESCRIPTION Surface mount 5x7mm VCSO operating at 3.3V supply with complementary LVPECL outputs for use in datacom & telecom applications. ELECTRICAL SPECIFICATIONS Parameter Operating Conditions Nominal Freque.

  VCS1026   VCS1026


Document
VCS1026 FEATURES • Industry Standard 5x7mm SMT Footprint • +3.3 Vdc Supply Voltage • -40°C to 85°C Temp. Range • LVPECL differential outputs • ± 50ppm Absolute Pull Range (APR) • Output Enable/Disable Function • SAW resonator • Extremely Low Jitter • Tape & Reel Packaging • RoHS Compliant DESCRIPTION Surface mount 5x7mm VCSO operating at 3.3V supply with complementary LVPECL outputs for use in datacom & telecom applications. ELECTRICAL SPECIFICATIONS Parameter Operating Conditions Nominal Frequency Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current Load VCC; ±5% Icc; Max. VCC; TA = 25°C load = 50Ω to VCC – 2V output to VCC – 2V fNOM www.DataSheet4U.com 622.080MHz VCSO Conditions & Remarks Min -40 -55 3.135 +20 50 0.3 ± 50 - Typical 622.080 3.300 60 50 100 180 50 2 Max 85 125 3.465 70 -150 3.0 10 Unit MHz °C °C Vdc mA Ω ppm kΩ Vdc ppm/V ppm kHz % Frequency Stability Frequency vs. Temperature ref to TA = 25°C; VC = constant Electronic Frequency Control Input Impedance Control Voltage Range Gain Transfer Absolute Pull Range Modulation Bandwidth Linearity NOTE 1: APR; all causes (see note 1) -3dB ref. 100Hz Deviation from best linear fit Zi VC ; positive monotonic transfer Minimum guaranteed frequency shift (∆f/fNOM) under all conditions (temperature, aging, supply voltage, load) for 15 years at an average effective operating temperature of +55°C Document No. VCS1026 06/28/2007 Page 1 - 4 Rev. A ٠ ٠ ٠ CTS Electronic Components, Inc. ٠ 171 Covington Drive ٠ Bloomingdale, IL 60108 ٠ ٠ ٠ ٠ ٠ ٠ www.ctscorp.com ٠ ٠ ٠ VCS1026 ELECTRICAL SPECIFICATIONS (Continued) Parameter Output Parameters Output Signal Amplitude Rise/Fall Times Duty Cycle Start up time 20% to 80% @ 50% of output signal to reach 90% of final amplitude 100Hz 1kHz Phase Noise 10kHz 100kHz 1MHz 12kHz to 20MHz (calculated from Phase Noise) 50kHz to 80MHz (calculated from Phase Noise) VOL VOH www.DataSheet4U.com 622.080MHz VCSO Conditions & Remarks Min Typical LVPECL 250 50 -85 -110 -140 -143 -143 0.16 0.16 Max Unit VCC-1.025 VCC-1.620 45 - 400 55 10 -75 -100 -130 -140 -140 0.3 0.3 Vdc ps % ms dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ps RMS ps RMS Phase Jitter LVPECL OUTPUT WAVEFORM TEST CIRCUIT, LVPECL LOAD Pad 2 Low ”0” Open High ”1” OUTPUT ENABLE/DISABLE LOGIC Pad 4 outputs disabled HI Z outputs enabled Output outputs enabled Output Pad 5 HI Z Comp. Output Comp. Output Document No. VCS1026 06/28/2007 Page 2 - 4 Rev. A ٠ ٠ ٠ CTS Electronic Components, Inc. ٠ 171 Covington Drive ٠ Bloomingdale, IL 60108 ٠ ٠ ٠ ٠ ٠ ٠ www.ctscorp.com ٠ ٠ ٠ VCS1026 MECHANICAL SPECIFICATIONS PACKAGE DRAWING PIN 6 PIN 5 PIN 4 www.DataSheet4U.com 622.080MHz VCSO PIN #1 MARK VCS1026 CTS YYWW PIN 1 PIN 2 PIN 3 EXPOSED GROUND PLANE AND COVER CASTELLATION 2 PLACES 0.56 TYP [.022] PIN 1 PIN 2 PIN 3 2.68 [.105] MAX 1.27 [.050] TYP 1.47 [.058] 1.68 [.066] 5.18±0.10 [.204±.004] 1.27 TYP [.050] 1.90 [.075] 1.68 [.066] 1.47 [.058] PIN 6 PIN 5 PIN 4 2.54 [.100] 5.08 [.200] 7.52±0.10 [.296±.004] BARRIER COVERING OVER RESIST MASK OVER GROUND PLANE Lead Termination Finish: Gold flash, <10 micro inch, over 100 micro inch minimum Ni plated Cu Co-Planarity (from seating plane): 0.1 [0.004] maximum Dimensions in mm and [inches] 1) Control Voltage - VC 2) Enable/Disable Control 3) Ground/Case 4) Output 5) Complementary Output 6) Supply Voltage - VCC Document No. VCS1026 06/28/2007 Page 3 - 4 Rev. A ٠ ٠ ٠ CTS Electronic Components, Inc. ٠ 171 Covington Drive ٠ Bloomingdale, IL 60108 ٠ ٠ ٠ ٠ ٠ ٠ www.ctscorp.com ٠ ٠ ٠ VCS1026 SUGGESTED SOLDER PAD GEOMETRY 5.08 [.200] 2.54 [.100] www.DataSheet4U.com 622.080MHz VCSO 1.70 [.067] 3.83 [.151] 2.34 [.092] 5.54 [.218] 1.68 [.066] Dimensions are in mm and [inches]. MAXIMUM SOLDERING PROFILE Temperature 217°C 260°C (Absolute max temperature) Time 60-150 sec 10 sec. max Note: Part is not designed to be reflowed in an inverted position. TAPE AND REEL INFORMATION 17.5 Ø13 2.0 Ø1.50 8.00 4.00 1.75 3.10 2.90 120° 7.50 7.80 7.60 16.00 Ø60 Ø180 5.60 5.40 DIRECTION OF FEED DIMENSIONS ARE IN MM Ø23 Device quantity is 1000 pieces max. per 180mm reel. MSL Level: 1 This product is fully compliant to RoHS Directive 2002/95/EC Document No. VCS1026 06/28/2007 Page 4 - 4 Rev. A ٠ ٠ ٠ CTS Electronic Components, Inc. ٠ 171 Covington Drive ٠ Bloomingdale, IL 60108 ٠ ٠ ٠ ٠ ٠ ٠ www.ctscorp.com ٠ ٠ ٠ .


MFPH10S VCS1026 VGA-P014458-QGG


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)