Microstep Constant Current Driver IC
Drivers
www.DataSheet4U.com
IMT-901 - Microstep Constant Current Driver “IC”
The IMT 901 is a PWM chopper type sinusoi...
Description
Drivers
www.DataSheet4U.com
IMT-901 - Microstep Constant Current Driver “IC”
The IMT 901 is a PWM chopper type sinusoidal micro step bipolar steppping motor driver. Sinusoidal micro step operation is generated by means of built-in hardware and is outputted for operation by clock signal inputting.
Advantages:
only one IC for power and logic (up to 2,5 A/phase) reduces considerably space, assembly time and cost of a microstep driver with a max. functions yet with a min. of ext. components. selectable from: 1/1-, 1/2-, 1/4-, 1/8-Step enables individual application-related microstep switching, smooth and constant running and reduces considerably system resonance. Current down system or current zeroing reduces or eliminates motor power losses and heating during standstill
Dimensions (mm) PIN-Assignment max. Nominal Values (at 25 °C)
Supply voltage VCC: V M: Output current lout: Power dissipation Pd 5,5 V 40 V 1,5 A (AVE) 2,5 A (peak) 4 W/40 W without/with heat sink TC=85 °C -40°C to 85°C -55°C to 150°C
Signal Circuit times t1: pulse width >10µs t2: pulse width >10µs t3: > 5µs t4: >10µs
Operation temp.: Storage temp.:
mounting form CPP-25
Input M1 M2 L H L H L L H H
Mode 1/1 Step 1/2 Step 1/4 Step 1/8 Step
Inputs
Thermal Behavior
Input-/Output-Signals
Nanotec® GmbH Gewerbestr. 11 D-85652 Landsham Phone 089/900 686-0 Fax
089/900 686-50 http://www.nanotec.com
www.DataSheet4U.com
Drivers
IMT-901
Function Table Block diagramm (+ external Circuit)
Full-/Half-St...
Similar Datasheet