Fault Tolerant CAN Transceiver
AMIS-41682, AMIS-41683
Fault Tolerant CAN Transceiver
Description The new AMIS−41682 and AMIS−41683 are interfaces bet...
Description
AMIS-41682, AMIS-41683
Fault Tolerant CAN Transceiver
Description The new AMIS−41682 and AMIS−41683 are interfaces between the
protocol controller and the physical wires of the bus lines in a control area network (CAN). AMIS−41683 is identical to the AMIS−41682 but has a true 3.3 V digital interface to the CAN controller. The device provides differential transmit capability but will switch in error conditions to a single−wire transmitter and/or receiver. Initially it will be used for low speed applications, up to 125 kB, in passenger cars.
Both AMIS−41682 and AMIS−41683 are implemented in I2T100 technology enabling both high−voltage analog circuitry and digital functionality to co−exist on the same chip.
These products consolidate the expertise of ON Semiconductor for in−car multiplex transceivers and support together with 0REMX−002−XTP (VAN), AMIS−30660 and AMIS−30663 (CAN high speed) and AMIS−30600 (LIN) another widely used physical layer.
www.onsemi.com PIN ASSIGNMENT
INH 1 TxD 2 RxD 3 ERR 4 STB 5
AMIS−4168x
14 VBAT 13 GND 12 CANL 11 CANH 10 VCC
Features
Fully Compatible with ISO11898−3 Standard
EN 6
9 RTL
Optimized for In−Car Low−speed Communication
WAKE 7
8 RTH
♦ Baud Rate up to 125 kB
♦ Up to 32 Nodes can be Connected ♦ Due to Built−in Slope Control function and a very Good Matching
(Top View) PC20041029.1
of the CANL and CANH bus outputs, this device realizes a very low electromagnetic emission (EME) ♦ Fully Integrated Receiver Filters
ORDERING INF...
Similar Datasheet