Voltage Controlled Silicon Oscillator
LTC6990
TimerBlox: Voltage Controlled Silicon Oscillator
FEATURES
n Fixed-Frequency or Voltage-Controlled Operation n...
Description
LTC6990
TimerBlox: Voltage Controlled Silicon Oscillator
FEATURES
n Fixed-Frequency or Voltage-Controlled Operation n Fixed: Single Resistor Programs Frequency with <1.5% Max Error n VCO: Two Resistors Set VCO Center Frequency and Tuning Range
n Frequency Range: 488Hz to 2MHz n 2.25V to 5.5V Single Supply Operation n 72µA Supply Current at 100kHz n 500µs Start-Up Time n VCO Bandwidth >300kHz at 1MHz n CMOS Logic Output Sources/Sinks 20mA n 50% Duty Cycle Square Wave Output n Output Enable (Selectable Low or Hi-Z When Disabled) n 55°C to 125°C Operating Temperature Range n Available in Low Profile (1mm) SOT-23 (ThinSOT™)
and 2mm × 3mm DFN Package n AEC-Q100 Qualified for Automotive Applications
APPLICATIONS
n Low Cost Precision Programmable Oscillator n Voltage-Controlled Oscillator n High Vibration, High Acceleration Environments n Replacement for Fixed Crystal and Ceramic Oscillators n Portable and Battery-Powered Equipment
All registered trademarks and trademarks are the property of their respective owners. Protected by U.S. patents, including 6342817, 6614313.
DESCRIPTION
The LTC®6990 is a precision silicon oscillator with a programmable frequency range of 488Hz to 2MHz. It can be used as a fixed-frequency or voltage-controlled oscillator (VCO). The LTC6990 is part of the TimerBlox® family of versatile silicon timing devices.
A single resistor, RSET, programs the LTC6990’s internal master oscillator frequency. The output frequency is determined by th...
Similar Datasheet