Aluminum Electrolytic Capacitor
www.DataSheet4U.com Aluminum Electrolytic Capacitor/TG
Surface Mount Type
Series: TG s Features Type :
V
Japan Endura...
Description
www.DataSheet4U.com Aluminum Electrolytic Capacitor/TG
Surface Mount Type
Series: TG s Features Type :
V
Japan Endurance:125°C 1000 to 2000 h Miniaturization(40% less than TA Series) Low ESR(Low temp) Vibration-proof product is available upon request.( φ8 < =)
Corresponds to use in the car engine room. The best for an electronically controlled unit (ECU, ABS etc).
s Application s Specifications
Category temp. range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan δ Characteristics at Low Temperature
-40 to +125°C 10 to 100 V .DC 10 to 4700 µ F ±20 % (120Hz/+20°C) I < = 0.01 CV or 3(µ A) after 2 minutes (whichever, greater) Please see the attached standard products list
W.V. (V) -25 / +20 °C -40 / +20 °C 10 3 6 16 2 4 25 2 4 35 2 3 50 2 3 63 2 3 80 2 3 100 2 3 (Inpedance ratio at 120Hz)
Endurance
Shelf Life
After applying rated working voltage for 1000 hours(φ8 x 6.2), 2000 hours(8x10.2 < =) at +125 ±2°C and then being stabilized at +20°C, capacitors shall meet the following limits. ±30 % of initial measured value (code U:±35%) Capacitance change < 300 % of initial specified value (code U:350%) tan δ = < initial specified value DC leakage current = After storage for 1000 hours at +125 ±2°C with no voltage applied and then being stabilized at +20°C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) After reflow soldering ( Refer to page 20 for recommendable temperature profile.) and then being stabilized at...
Similar Datasheet