Flash Microcontrollers
PIC16(L)F707
40/44-Pin Flash Microcontrollers with XLP and mTouch® Technology
Devices included in this data sheet
• PI...
Description
PIC16(L)F707
40/44-Pin Flash Microcontrollers with XLP and mTouch® Technology
Devices included in this data sheet
PIC16F707
PIC16LF707
High-Performance RISC CPU
Only 35 Single-Word Instructions to Learn: - All single-cycle instructions except branches
Operating Speed: - DC – 20 MHz clock input - DC – 200 ns instruction cycle
Interrupt Capability 8-Level Deep Hardware Stack Direct, Indirect and Relative Addressing modes Processor Read Access to Program Memory Pinout Compatible to other 40-Pin PIC16CXXX
and PIC16FXXX Microcontrollers
Memory
8K x 14 Words of Flash Program Memory 363 Bytes of Data Memory (SRAM)
Special Microcontroller Features
Precision Internal Oscillator: - 16 MHz or 500 kHz operation - Factory calibrated to ±1%, typical - Software selectable ÷1, ÷2, ÷4 or ÷8 divider
31 kHz Low-Power Internal Oscillator External Oscillator Block with:
- Three crystal/resonator modes up to 20 MHz - Three external clock modes up to 20 MHz Power-on Reset (POR) Power-up Timer (PWRT) Oscillator Start-Up Timer (OST) Brown-out Reset (BOR): - Selectable between two trip points - Disabled in Sleep option Watchdog Timer (WDT) Programmable Code Protection In-Circuit Serial Programming™ (ICSP™) via Two Pins In-Circuit Debug (ICD) via Two Pins Multiplexed Master Clear with Pull-up/Input Pin Industrial and Extended Temperature Range
Operating Voltage Range: - 1.8V to 3.6V (PIC16LF707) - 1.8V to 5.5V (PIC16F707)
Extreme Low-Power Management...
Similar Datasheet