Three-wire Serial EEPROM
ACE93C46
Three-wire Serial EEPROM
Description The ACE93C46 provides 1024 bits of serial electrically erasable programma...
Description
ACE93C46
Three-wire Serial EEPROM
Description The ACE93C46 provides 1024 bits of serial electrically erasable programmable read only memory (EEPROM) organized as 64 words of 16 bits each, when the ORG pin is connected to VCC and 128 words of 8 bits each when it is tied to ground. The ACE93C46 is available in space-saving 8-lead PDIP, 8-lead TSSOP and 8-lead JEDEC SOIC packages. The ACE93C46 is enabled through the Chip Select pin (CS), and accessed via a 3-wire serial interface consisting of Data Input (DI), Data Output (DO), and Shift Clock (SK). Upon receiving a Read instruction at DI, the address is decoded and the data is clocked out serially on the data output pin DO. The WRITE cycle is completely self-timed and no separate erase cycle is required before write. The Write cycle is only enabled when it is in the Erase/Write Enable state. When CS is brought “high” following the initiation of a write cycle, the DO pin outputs the Ready/Busy status.
Features Low-voltage operation – 1.8 (VCC=1.8 to 5.5V) Three-wire serial Interface 2MHz clock rate(5V) compatibility Self-timed write cycle (5 ms max) High-reliability – Endurance: 1 Million write cycles
Data retention: 100 Years
Packaging Type
DIP-8
SOP-8
TSSOP-8
Pin Configurations Pin Name CS SK DI DO GND Vcc ORG DC
Function Chip select Serial Data Clock Serial Data Input Serial Data Output
Ground Power Supply Internal Organization Don’t Connect
VER 1.4 1
Block Diagram
ACE93C46
Three-wire Serial EEPROM
Note:...
Similar Datasheet