LPC2157

www.DataSheet4U.com LPC2157/2158 Single-chip 16-bit/32-bit microcontrollers; 512 kB flash, with 32 segment x 4 LCD driver Rev. 02 — 9 February 2009 Product data sheet 1. General description The LPC2157/2158 is a multi-chip module consisting of a LPC2138/2148 single-chip microcontroller combined with a PCF8576D Universal LCD driver in a low-cost 100-pin package. The LCD driver provides 32 segments and supports from 1 to 4 backplanes. Display overhead is minimized by an on-chip display RAM with auto-increment addressing. Refer to the respective LPC2148 and LPC2138 user manual for details. 2. Features I 128-bit wide interface/accelerator enables high-speed 60 MHz operation. N 32 kB to 40 kB of on-chip static RAM and 512 kB of on-chip flash memory. I USB 2.0 Full-speed compliant device controller with 2 kB of endpoint RAM. N An additional 8 kB of on-chip RAM accessible to USB by DMA (LPC2158 only). I 32 segment × 4 backplane LCD controller supports from 1 to 4 backplanes. I Single 10-bit DAC provides variable analog output. I Low power Real-Time Clock (RTC) with independent power and 32 kHz clock input. I Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s), SPI and SSP with buffering and variable data length capabilities. I Single power supply chip with POR and BOD circuits: N CPU operating voltage range of 3.0 V to 3.6 V (3.3 V ± 10 %) with 5 V tolerant I/O pads. I 100-pin LQFP package with 38 microcontroller I/O pins minimum. I Individual ena...