API9221

www.DataSheet4U.com API9221 Car/Wall or USB Supply Input Lithium Battery Charger with OVP USB Bypass and 10mA LDO Description The API9221 has two supply inputs for highly integrated portable applications, enabling charging from a USB host, wall adapter, or car adapter. The PPR pin indicates to a host controller that a safe and valid supply is connected to either VUSB or VDC. The higher charge current option from VDC will take priority if both supplies are connected. The host controller can control the state of charging via the enable pin EN . The API9221 implements the constant current/constant voltage (CC/CV) charge algorithm for Lithium based battery cells. The connected cell will be charged to 4.2V with an accuracy of 1% over the entire temperature range. The termination current is programmable via an external resistor, RIMIN. The CHG pin indicates when the termination current is reached, and is reset by EN , power off, or battery below 3.9V. The maximum charge current can be programmed independently via the resistors RIUSB and RIVDC. The API9221 comes with several protection features. To prevent system damage, the VUSB pin uses over voltage protection (OVP) at 5.4V, and the VDC OVP is at 6.9V. Above these levels, the non-operating device is protected against damage up to 28V. For control and system start-up the API9221 has a current limited linear regulator. To protect the chip against excessive power dissipation, temperature monitoring is integrated, which folds back t...