VN750PEP-E

www.DataSheet4U.com VN750PEP-E HIGH SIDE DRIVER TARGET SPECIFICATION Table 1. General Features Type VN750PEP-E RDS(on) 60 mΩ IOUT 6A VCC 36 V Figure 1. Package CMOS COMPATIBLE INPUT s ON STATE OPEN LOAD DETECTION s OFF STATE OPEN LOAD DETECTION s SHORTED LOAD PROTECTION s UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN s PROTECTION AGAINST LOSS OF GROUND s VERY LOW STAND-BY CURRENT s s s PowerSSO-12 REVERSE BATTERY PROTECTION (*) IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE DESCRIPTION The VN750PEP-E is a monolithic device designed in STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). Active current limitation combined with thermal shutdown and automatic restart protect the device against overload. The device detects open load condition both is on and off state. Output shorted to VCC is detected in the off state. Device automatically turns off in case of ground pin disconnection. Table 2. Order Codes Package PowerSSO-12 Note: (*) See application schematic at page 9. Tube VN750PEP-E Tape and Reel VN750PEPTR-E Rev. 1 October 2004 1/13 This is preliminary information on a new product foreseen to be developed. Details are subject to change without notice. VN750PEP-E Figure 2. Block Diagram www.DataSheet4U.com VCC VCC CLAMP OVERVOLTAGE DETECTION UNDERVOLTAGE DETECTION GND Power CLAMP...