DatasheetsPDF.com

TDA8262HN Dataheets PDF



Part Number TDA8262HN
Manufacturers NXP
Logo NXP
Description Fully integrated satellite tuner
Datasheet TDA8262HN DatasheetTDA8262HN Datasheet (PDF)

TDA8262HN Fully integrated satellite tuner Rev. 01 — 14 December 2004 www.DataSheet4U.com Product data sheet 1. General description The direct conversion QPSK demodulator is the front-end receiver dedicated to digital TV broadcasting, satisfying both DVB-S and DBS TV standards. The wide range oscillator (from 950 MHz to 2175 MHz) covers the American, European and Asian satellite bands, as well as the SMA-TV US standard. The Zero-IF (ZIF) concept discards traditional IF filtering and intermedia.

  TDA8262HN   TDA8262HN



Document
TDA8262HN Fully integrated satellite tuner Rev. 01 — 14 December 2004 www.DataSheet4U.com Product data sheet 1. General description The direct conversion QPSK demodulator is the front-end receiver dedicated to digital TV broadcasting, satisfying both DVB-S and DBS TV standards. The wide range oscillator (from 950 MHz to 2175 MHz) covers the American, European and Asian satellite bands, as well as the SMA-TV US standard. The Zero-IF (ZIF) concept discards traditional IF filtering and intermediate conversion techniques. Gain-controlled amplifiers in the RF guarantee optimum signal level. The variable gain is controlled by the signal returned from the Satellite Demodulator and Decoder (SDD) and applied to pin AGC. The integrated LNA allows the IC to be directly connected to the LNB output. The LNA can be by-passed by an I2C-bus selectable attenuation, providing a 20 dB extra attenuation in order to handle higher input signal levels of up to 0 dBm per channel. An integrated loop-through realizes a copy of the input RF signal for another downconverter. This feature offers a BOM reduction and simplifies the application for dual channel demodulation like watch and record. Connected at the RF input, an RMS level detector provides through I2C-bus read mode the full band input signal level. The LO quadrature outputs are derived from a high performance integrated LC oscillator. f LO f XTAL Its frequency is: -------- = -------------- . Thanks to the low phase noise performance of the N R integrated LC oscillator which controls the LO frequency, the synthesizer offers a good performance for phase noise in the satellite band. The step size of the LO output frequency is equal to the comparison frequency. Control data is entered via the I2C-bus. The bus can be either 5.0 V or 3.3 V, allowing compatibility with most of existing microcontrollers. An 8-byte frame is required to address the device and to program the main divider ratio, the reference divider ratio, the charge-pump current and the operating mode. A flag is set when the loop is in-lock, readable during read operations, as well as the Power-on reset flag and RF input level. The device has four selectable I2C-bus addresses. Applying a specific voltage to pin AS selects an address. This feature gives the possibility to use up to four TDA8262HN ICs in the same system. Philips Semiconductors TDA8262HN Fully integrated satellite tuner www.DataSheet4U.com 2. Features s s s s s Direct conversion QPSK and 8PSK demodulation (ZIF) 3.3 V DC supply voltage (no 30 V required) Power-down modes selectable by bus 950 MHz to 2175 MHz frequency range High range input level; x −70 dBm to −15 dBm at 75 Ω (normal mode) x Up to 0 dBm (20 dB attenuation configuration). Low noise RF input (integrated LNA) RF loop-through 0 dB to 55 dB continuous variable gain on RF input RF input level detector Switchable 0 dB to 9 dB additional gain on baseband output amplifier High AGC linearity (< 0.7 dB/step when used with an 8-bit DAC), AG.


M30W0R6500T0 TDA8262HN VDP-7500


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)