ADC1004S040

ADC1004S030/040/050 Rev. 03 — 7 August 2008 www.DataSheet4U.com Single 10 bits ADC, up to 30 MHz, 40 MHz or 50 MHz Product data sheet 1. General description The ADC1004S030/040/050 are a family of 10-bit high-speed low-power Analog-to-Digital Converters (ADC) for professional video and other applications. They convert the analog input signal into 10-bit binary-coded digital signals at a maximum sampling rate of 50 MHz. All digital inputs and outputs are Transistor-Transistor Logic (TTL) and CMOS compatible, although a low-level sine wave clock input signal is allowed. The device requires an external source to drive its reference ladder. If the application requires that the reference is driven via internal sources, NXP Semiconductors recommends you use one of the ADC1003S030/040/050 family. 2. Features I I I I I I I I I I I I I I 10-bit resolution Sampling rate up to 50 MHz DC sampling allowed One clock cycle conversion only High signal-to-noise ratio over a large analog input frequency range (9.4 effective bits at 4.43 MHz full-scale input at fclk = 40 MHz) No missing codes guaranteed In-Range (IR) CMOS output TTL and CMOS levels compatible digital inputs 3 V to 5 V CMOS digital outputs Low-level AC clock input signal allowed External reference voltage regulator Power dissipation only 175 mW (typical) Low analog input capacitance, no buffer amplifier required No sample-and-hold circuit required 3. Applications I I I I I I I Video data digitizing Radar Transient signal ana...