500mA 2MHz Synchronous Step-Up DC/DC Converters
LTC3526-2/LTC3526B-2
NOT RECOMMENDED FOR NEW DESIGNS
Contact Linear Technology for Potential Replacement
500mA 2MHz Sy...
Description
LTC3526-2/LTC3526B-2
NOT RECOMMENDED FOR NEW DESIGNS
Contact Linear Technology for Potential Replacement
500mA 2MHz Synchronous Step-Up DC/DC Converters
in 2mm × 2mm DFN
Features
Description
n Delivers 3.3V at 100mA from a Single Alkaline/ NiMH Cell or 3.3V at 200mA from Two Cells
n VIN Start-Up Voltage: 850mV n VIN Operating Range: 0.5V to 5V n 1.6V to 5.25V VOUT Range n Up to 94% Efficiency n Output Disconnect n 2MHz Fixed Frequency Operation n VIN > VOUT Operation n Integrated Soft-Start n Current Mode Control with Internal Compensation n Burst Mode® Operation with 9µA Quiescent Current
(LTC3526-2) n Low Noise PWM Operation (LTC3526B-2) n Internal Synchronous Rectifier n Logic Controlled Shutdown (IQ < 1µA) n Anti-Ringing Control n Low Profile (2mm × 2mm × 0.75mm) DFN-6 Package
Applications
n Medical Instruments n Flash-Based MP3 Players n Noise Canceling Headphones n Wireless Mice n Bluetooth Headsets
The LTC®3526-2/LTC3526B-2 are synchronous, fixed frequency step-up DC/DC converters with output disconnect. Synchronous rectification enables high efficiency in the low profile 2mm × 2mm DFN package. Battery life in single AA/AAA powered products is extended further with an 850mV start-up voltage and operation down to 500mV once started.
A switching frequency of 2MHz minimizes solution footprint by allowing the use of tiny, low profile inductors and ceramic capacitors. The current mode PWM design is internally compensated, reducing external parts count. The LTC3526-2 f...
Similar Datasheet