Document
NTE5700 thru NTE5705 Industrial Power Module
www.DataSheet4U.com
Description: The NTE5700 through NTE5705 series of Integrated Power Circuits consist of power thyristors and power diodes configured in a single package. Applications include power supplies, control circuits and battery chargers. Features: D Glass Passivated Junctions for Greater Reliability D Electrically Isolated Base Plate D High Dynamic Characteristics Absolute Maximum Ratings: Maximum Repetitive Peak Reverse Voltage (VS £ 0), VRRM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200V Maximum Non--Repetitive Peak Reverse Voltage, VRSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1300V Maximum Repetitive Peak Off State Voltage Gate Open Circuit, VDRM . . . . . . . . . . . . . . . . . . 1200V Thermal and Mechanical Characteristics: Junction Operating Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . --40° to +125°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . --40° to +150°C Maximum Internal Thermal Resistance, One Junction to Case, RthJC DC Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.24K/W Maximum Thermal Resistance, Base to Heatsink, RthCS Mounting Surface Smooth and Greased . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.10K/W Mounting Torque, Base to Heatsink ±10% (Note 1), T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Nm Approximate Weight, wt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58g (2.0oz) Note 1. A mounting compound is recommended and the torque should be checked after a period of about 3 hours to allow for the spread of the compound.
Electrical Characteristics:
Parameter Forward Conduction Maximum DC Output Current Maximum Average On--State and Forward Current Maximum RMS Current Maximum Peak, One--Cycle N Non--Repetitive R titi On--State O St t or Forward Current IO IT(AV) IF(AV) IRMS ITSM or IFSM TC = +85°C, Full Bridge Circuits (NTE5700, NTE5701, NTE5702) 180° Sine Wave Conduction Circuits (All Types) 180° Sine Wave Conduction Circuit (NTE5702) 10ms 8.3ms 10ms 8.3ms
www.DataSheet4U.com 2
Symbol
Test Conditions
Rating Unit 25 12.5 28 300 315 357 375 450 410 637 580 6365 0.82 12 A A A A A A A A2s A2s A2s A2s A2Ös V mW V V A/ms mA mA
100% VRRM Sinusoidal Half Wave, R Reapplied li d I iti l TJ = TJ Max Initial M No Voltage R Reapplied li d 100% VRRM Initial TJ = TJ Max R Reapplied li d No Voltage R Reapplied li d
Maximum I t for Fusing
I2t
10ms 8.3ms 10ms 8.3ms
Maximum I2Öt for Fusing Maximum Value of Threshold Voltage Maximum Value of On--State Slope Resistance Maximum Peak On--State or Forward F d Voltage V lt Maximum Non--Repetitive Rate of Rise of Turned On Circuit Maximum Holding Current Maximum Latching Current Triggering Maximum Peak Gate Power Maximum Average Gate Power Maximum Peak Gate Current Maximum Peak Negative Gate Voltage Maximum Gate Voltage Required t T to Trigger i
I2Ö t VT(TO) rT VTM VFM di/dt IH IL
t = 0.1 to 10ms, No Voltage Reapplied, Note 2 TJ = +125°C TJ = +125°C ITM = p x IT(AV) IFM = p x IF(AV) TJ = +25°C, 180° Condition C diti
1.35 1.35 200 100 250
TJ = +125°C, from 0.67VDRM, ITM = p x IT(AV), Ig = 500mA, tr < 0.5ms, tp > 6ms TJ = +25°C, Anode Supply = 6V, Resistive Load, Gate Open Circuit TJ = +25°C, Anode Supply = 6V, Resistive Load
PGM PG(AV) IGM --VGM VGT TJ = --40°C TJ = +25°C TJ = +125°C Anode Supply = 6V R i ti L Resistive Load d
8.0 2.0 2.0 10 3.0 2.0 1.0
W W A V V V V
Electrical Characteristics (Cont’d):
Parameter Triggering (Cont’d) Maximum Gate Current Required t T to Trigger i IGT TJ = --40°C TJ = +25°C TJ = +125°C Maximum Gate Voltage that will not Trigger Blocking Maximum Critical Rate of Rise of Off--State Voltage Maximum Peak Reverse and Off--State Leakage Current www.DataSheet4U.com at VRRM, VDRM RMS Isolation Voltage dv/dt IRM IDM VINS 50Hz, Circuit to Base, All Terminals Shorted TJ = +125°C, Exponential to 0.67VDRM, Gate Open Circuit TJ = TJ Max, Gate Open Circuit 200 10 2.0 2500 V/ms mA mA V VGD TJ = +125°C, Rated VDRM Applied Anode Supply = 6V R i ti L Resistive Load d 90 60 35 0.2 mA mA mA V Symbol Test Conditions Rating Unit
Note 2. I2t for time tx = I2 Öt ¯ Ötx. Pin Connection and Schematic Diagrams:
NTE No. 5700 Description Single Phase, Hybrid Bridge, Common Cathode, Freewheeling Diode Terminal Positions Schematic Diagrams
G1 AC1 AC1 G1 (-) AC2 AC2 G2 (+) G2 *
(-)
(+)
5701
Single Phase, Hybrid Bridge, Common Anode, Freewheeling Diode
G1 AC1 AC1 G1 (-) AC2 AC2 G2 (+) G2 *
(-)
(+)
5702
Single Phase, All SCR Bridge
AC1 AC2 G1 AC1 G3 G2 G4 (+) (-) AC2
G3
G1
*
G4
G2
(-)
(+)
* For transient protection, a Metal Oxide Varistor (MOV) may be connected externally across terminals AC1 & AC2.
Pin Connection and Sche.