MX29F400CB

www.DataSheet4U.com MX29F400C T/B 4M-BIT [512Kx8/256Kx16] CMOS SINGLE VOLTAGE 5V ONLY BOOT SECTOR FLASH MEMORY FEATURES 524,288 x 8/262,144 x 16 switchable Single power supply operation - 5.0V only operation for read, erase and program operation Fast access time: 55/70/90ns Compatible with MX29F400T/B device Low power consumption - 40mA maximum active current(5MHz) - 1uA typical standby current Command register architecture - Byte/word Programming (9us/11us typical) - Sector Erase (Sector structure 16K-Bytex1, 8KBytex2, 32K-Bytex1, and 64K-Byte x7) Auto Erase (chip & sector) and Auto Program - Automatically erase any combination of sectors with Erase Suspend capability. - Automatically program and verify data at specified address Erase suspend/Erase Resume - Suspends an erase operation to read data from, or program data to, another sector that is not being erased, then resumes the erase Status Reply - Data# Polling & Toggle bit for detection of program and erase cycle completion Ready/Busy pin (RY/BY#) - Provides a hardware method of detecting program or erase cycle completion Sector protect/chip unprotect for 5V only system Sector protection - Hardware method to disable any combination of sectors from program or erase operations - Temporary sector unprotect allows code changes in previously locked sectors 100,000 minimum erase/program cycles Latch-up protected to 100mA from -1V to VCC+1V Boot Code Sector Architecture - T = Top Boot Sector - B =...