MX29F040C

www.DataSheet4U.com MX29F040C 4M-BIT [512K x 8] CMOS SINGLE VOLTAGE 5V ONLY EQUAL SECTOR FLASH MEMORY FEATURES 524,288 x 8 only Single power supply operation - 5.0V only operation for read, erase and program operation Fast access time: 55/70/90ns Compatible with MX29F040 device Low power consumption - 30mA maximum active current(5MHz) - 1uA typical standby current Command register architecture - Byte Programming (9us typical) - Sector Erase 8 equal sectors of 64K-Byte each Auto Erase (chip & sector) and Auto Program - Automatically erase any combination of sectors with Erase Suspend capability - Automatically program and verify data at specified address Erase suspend/Erase Resume - Suspends an erase operation to read data from, or program data to, another sector that is not being erased, then resumes the erase Status Reply - Data# Polling & Toggle bit for detection of program and erase cycle completion Sector protect/chip unprotect for 5V only system Sector protection - Hardware method to disable any combination of sectors from program or erase operations - Temporary sector unprotect allows code changes in previously locked sectors 100,000 minimum erase/program cycles 100,000 minimum erase/program cycles Latch-up protected to 100mA from -1V to VCC+1V Low VCC write inhibit is equal to or less than 3.2V Package type: - 32-pin PLCC, TSOP or PDIP - All Pb-free devices are RoHS Compliant Compatibility with JEDEC standard - Pinout and software com...