LT3485-0/LT3485-1/ www.DataSheet4U.com LT3485-2/LT3485-3 Photoflash Capacitor Chargers with Output Voltage Monitor and I...
LT3485-0/LT3485-1/ www.DataSheet4U.com LT3485-2/LT3485-3 Photoflash Capacitor Chargers with Output Voltage Monitor and Integrated IGBT Drive
FEATURES
■ ■ ■ ■ ■ ■ ■ ■
DESCRIPTIO
Integrated IGBT Driver Voltage Output Monitor Uses Small Transformers: 5.8mm × 5.8mm × 3mm Operates from Two AA Batteries, Single Cell Li-Ion or Any Supply from 1.8V up to 10V No Output Voltage Divider Needed No External
Schottky Diode Required Charges Any Size Photoflash Capacitor Available in 10-Lead (3mm × 3mm) DFN
VERSION LT3485-3 LT3485-0 LT3485-2 LT3485-1 INPUT CURRENT (mA) 750 500 350 225 CHARGE TIME (sec) 2.5 3.7 5.5 4.0*
Fast Charge Time
VIN = VBAT = 3.6V 100µF capacitor, 320V. *50µF capacitor
The LT®3485 family of photoflash chargers are highly integrated ICs containing complete charger and IGBT drive functions. The patented control technique of the LT3485-x allows it to use extremely small transformers. Output voltage detection requires no external circuitry. The turns ratio of the transformer controls the final charge voltage. While charging, the output voltage on the capacitor may be monitored by a microcontroller from the monitor pin. Each device contains an on-chip high voltage
NPN power switch, which can withstand negative voltages on the switch pin without an external
Schottky diode. The device features a VBAT pin, which allows the use of two AA cells to charge the capacitor. The internal circuitry operates from the VIN pin. The LT3485-0 has a primary current limit of 1.4A, where...