DatasheetsPDF.com

MX25L3205A Dataheets PDF



Part Number MX25L3205A
Manufacturers Macronix International
Logo Macronix International
Description 32M-BIT [x 1] CMOS SERIAL eLiteFlash MEMORY
Datasheet MX25L3205A DatasheetMX25L3205A Datasheet (PDF)

www.DataSheet4U.com MX25L3205A Macronix NBit TM Memory Family 32M-BIT [x 1] CMOS SERIAL eLiteFlashTM MEMORY FEATURES GENERAL • Serial Peripheral Interface (SPI) compatible -- Mode 0 and Mode 3 • 33,554,432 x 1 bit structure • 64 Equal Sectors with 64K byte each - Any sector can be erased • Single Power Supply Operation - 2.7 to 3.6 volt for read, erase, and program operations • Latch-up protected to 100mA from -1V to Vcc +1V • Low Vcc write inhibit is from 1.5V to 2.5V PERFORMANCE • High Perfor.

  MX25L3205A   MX25L3205A



Document
www.DataSheet4U.com MX25L3205A Macronix NBit TM Memory Family 32M-BIT [x 1] CMOS SERIAL eLiteFlashTM MEMORY FEATURES GENERAL • Serial Peripheral Interface (SPI) compatible -- Mode 0 and Mode 3 • 33,554,432 x 1 bit structure • 64 Equal Sectors with 64K byte each - Any sector can be erased • Single Power Supply Operation - 2.7 to 3.6 volt for read, erase, and program operations • Latch-up protected to 100mA from -1V to Vcc +1V • Low Vcc write inhibit is from 1.5V to 2.5V PERFORMANCE • High Performance - Fast access time: 50MHz serial clock (30pF + 1TTL Load) - Fast program time: 3ms/page (typical, 256-byte per page) - Fast erase time: 1s/sector (typical, 64K-byte per sector) and 64s/chip (typical) - Acceleration mode: - Program time: 2.4ms/page (typical) - Erase time: 0.8s/sector (typical) and 51s/chip (typical) • Low Power Consumption - Low active read current: 30mA (max.) at 50MHz - Low active programming current: 30mA (max.) - Low active erase current: 38mA (max.) - Low standby current: 50uA (max.) - Deep power-down mode 1uA (typical) • Minimum 10K erase/program cycle for array • Minimum 100K erase/program cycle for additional 4Kb SOFTWARE FEATURES • Input Data Format - 1-byte Command code • Auto Erase and Auto Program Algorithm - Automatically erases and verifies data at selected sector - Automatically programs and verifies data at selected page by an internal algorithm that automatically times the program pulse widths (Any page to be programed should have page in the erased state first) • Status Register Feature • Electronic Identification - JEDEC 2-byte Device ID - RES command, 1-byte Device ID - REMS command, ADD=00H will output the manufacturer's ID first and ADD=01H will output device ID first • Additional 4Kb sector independent from main memory for parameter storage to eliminate EEPROM from system HARDWARE FEATURES • SCLK Input - Serial clock input • SI Input - Serial Data Input • SO/PO7 - Serial Data Output or Parallel mode Data output/input • WP#/ACC Pin - Hardware write protection and Program/erase acceleration • HOLD# pin - pause the chip without disselecting the chip (not for parallel mode, please connect HOLD# pin to VCC during parallel mode) • PO0~PO6 - for parallel mode data output/input • PACKAGE - 16-pin SOP (300mil) - 8-land SON (8x6mm) - All Pb-free devices are RoHS Compliant P/N: PM1243 REV. 1.2, NOV. 06, 2006 1 www.DataSheet4U.com MX25L3205A GENERAL DESCRIPTION The MX25L3205A is a CMOS 33,554,432 bit serial eLiteFlashTM Memory, which is configured as 4,194,304 x 8 internally. The MX25L3205A features a serial peripheral interface and software protocol allowing operation on a simple 3- wire bus. The three bus signals are a clock input (SCLK), a serial data input (SI), and a serial data output (SO). SPI access to the device is enabled by CS# input. The MX25L3205A provide sequential read operation on whole chip. User may start to read from any byte of the array. While the end of the array is reached, the device will wra.


MX25L2005 MX25L3205A MX25L4005A


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)