18MB B-DIE SYNC SRAM SPECIFICATION 100TQFP WITH PB / PB-FREE
K7A163631B K7A161831B
www.DataSheet4U.com
512Kx36 & 1Mx18 Synchronous SRAM
18Mb B-die Sync. SRAM Specification
100TQF...
Description
K7A163631B K7A161831B
www.DataSheet4U.com
512Kx36 & 1Mx18 Synchronous SRAM
18Mb B-die Sync. SRAM Specification
100TQFP with Pb & Pb-Free
(RoHS compliant)
INFORMATION IN THIS DOCUMENT IS PROVIDED IN RELATION TO SAMSUNG PRODUCTS, AND IS SUBJECT TO CHANGE WITHOUT NOTICE. NOTHING IN THIS DOCUMENT SHALL BE CONSTRUED AS GRANTING ANY LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IN SAMSUNG PRODUCTS OR TECHNOLOGY. ALL INFORMATION IN THIS DOCUMENT IS PROVIDED ON AS "AS IS" BASIS WITHOUT GUARANTEE OR WARRANTY OF ANY KIND.
1. For updates or additional information about Samsung products, contact your nearest Samsung office. 2. Samsung products are not intended for use in life support, critical care, medical, safety equipment, or similar applications where Product failure could result in loss of life or personal or physical harm, or any military or defense application, or any governmental procurement to which special terms or provisions may apply.
* Samsung Electronics reserves the right to change products or specification without notice.
-1-
July 2005 Rev 1.0
K7A163631B K7A161831B
Document Title
www.DataSheet4U.com
512Kx36 & 1Mx18 Synchronous SRAM
512Kx36 & 1Mx18-Bit Synchronous Pipelined Burst SRAM
Revision History
Rev. No. 0.0 0.1 0.2 History 1. Initial draft 1. Update the DC current spec(ICC, ISB) 1. Change the ISB,ISB1,ISB2 - ISB ; from 120mA to 170mA - ISB1 ; from 80mA to 150mA - ISB2 ; from 80mA to 130mA 1. Remove the 1.8V Vd...
Similar Datasheet