Document
www.DataSheet4U.com
RD74LVC1G14
Schmitt–trigger Inverter Buffer
REJ03D0705–0100 Rev.1.00 Jul 26, 2006
Description
The RD74LVC1G14 has an Schmitt–trigger Inverter Buffer in a 5-pin package. Low voltage and high-speed operation is suitable for the battery powered products (e.g., notebook computers), and the low power consumption extends the battery life.
Features
The basic gate function is lined up as Renesas uni logic series. Supply voltage range : 1.65 to 5.5 V Operating temperature range: –40 to +85°C All inputs: VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) All outputs: VO (Max.) = 5.5 V (@VCC = 0 V) Output current: ±4 mA (@VCC = 1.65 V) ±8 mA (@VCC = 2.3 V) ±24 mA (@VCC = 3.0 V) ±32 mA (@VCC = 4.5 V) • Ordering Information
Part Name RD74LVC1G14WPE Package Type WCSP-5 pin Package Code (Previous Code) SXBG0005LB–A (TBS-5CV) Package Abbreviation WP Taping Abbreviation (Quantity) E (3,000 pcs/reel)
• • • • • •
Article Indication
Marking Year code Month code
EAYM
Rev.1.00 Jul 26, 2006 page 1 of 7
RD74LVC1G14
Function Table
Input A H L H: High level L: Low level Output Y L H
www.DataSheet4U.com
Pin Arrangement
0.7 mm Height 0.4 mm 0.4 mm pitch 0.17 mm 5–Ball (WP) GND
3
4
Y
A
2
1.1 mm
Pin#1 INDEX
DNU*
1
5
VCC
DNU: Do not use.
(Bottom view)
(Top view)
Logic Diagram
A Y
Rev.1.00 Jul 26, 2006 page 2 of 7
RD74LVC1G14
Absolute Maximum Ratings
Item Supply voltage range Input voltage range *1 Output voltage range *1, 2 Input clamp current Output clamp current Continuous output current Continuous current through VCC or GND Package Thermal impedance Storage temperature Notes: Symbol VCC VI VO IIK IOK IO ICC or IGND θja Tstg Ratings –0.5 to 6.5 –0.5 to 6.5 –0.5 to VCC +0.5 –0.5 to 6.5 –50 –50 ±50 ±100 200 –65 to 150 Unit V V V mA mA mA mA °C/W °C WP
www.DataSheet4U.com
Test Conditions
Output : H or L VCC : OFF VI < 0 VO < 0 VO = 0 to VCC
The absolute maximum ratings are values, which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 5.5 V maximum.
Recommended Operating Conditions
Item Supply voltage range Input voltage range Output voltage range Symbol VCC VI VO Min 1.65 0 0 — — — — — — — — — Max 5.5 5.5 VCC 4 8 16 24 32 –4 –8 –16 –24 –32 85 Unit V V V Conditions
VCC = 1.65 V VCC = 2.3 V VCC = 3.0 V mA VCC = 4.5 V VCC = 1.65 V VCC = 2.3 V VCC = 3.0 V VCC = 4.5 V °C
IOL
Output current
IOH
— Operating free-air temperature Ta –40 Note: Unused or floating inputs must be held high or low.
Rev.1.00 Jul 26, 2006 page 3 of 7
RD74LVC1G14
Electrical Characteristics
Item Symbol VCC (V) 1.8 2.5 3.3 5.0 1.8 2.5 3.3 5.0 1.8 2.5 3.3 5.0 Min to Max 1.65 2.3 3.0 Output voltage 4.5 Min to Max 1.65 2.3 3.0 4.5 0 to 5.5 5.5 3 to 5.5 Min 0.8 1.2 1.6 2.3 0.4 0.6 0.9 1.5 0.4 0.4 0.4 0.4 VCC–0.1 1.2 1.9 2.4 2.3 3.8 — — — — — — — — — Typ — — — — — — — — — — — — — — — — — — — — — — — — — — — Max 1.4 1.7 2.3 3.0 0.7 1.0 1.4 2.0 0.7 0.8 0.9 1.0 — — — — — — 0.1 0.45 0.3 0.4 0.55 0.55 ±5 10 µA ∆ICC 500 Unit
www.DataSheet4U.com
Ta = –40 to 85°C
Test condition
VT+
Threshold voltage
VT-
V
∆VT
VOH
IOH = –100 µA IOH = –4 mA IOH = –8 mA IOH = –16 mA IOH = –24 mA V IOH = –32 mA IOL = 100 µA IOL = 4 mA IOL = 8 mA IOL = 16 mA IOL = 24 mA IOL = 32 mA VIN = 5.5 V or GND VIN = VCC or GND, IO = 0 One input at VCC–0.6 V, Other input at VCC or GND
VOL
Input current Quiescent supply current
IIN ICC
µA
Output leakage IOFF 0 — — ±10 µA VIN or VO = 0 to 5.5 V current Input capacitance CIN 3.3 — 3.5 — pF VIN = VCC or GND Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions.
Rev.1.00 Jul 26, 2006 page 4 of 7
RD74LVC1G14
Switching Characteristics
Item Propagation delay time Symbol tPLH tPHL Ta = –40 to 85°C Min Max 2.8 3.8 9.9 11.0 Unit ns Test Conditions CL = 15 pF, RL = 1 MΩ CL = 30 pF, RL = 1.0 kΩ
www.DataSheet4U.com
VCC = 1.8 ± 0.15 V
FROM (Input) A TO (Output) Y
VCC = 2.5 ± 0.2 V
Item Propagation delay time Symbol tPLH tPHL Ta = –40 to 85°C Min Max 1.6 2.0 5.5 6.5 Unit ns Test Conditions CL = 15 pF, RL = 1 MΩ CL = 30 pF, RL = 500 Ω FROM (Input) A TO (Output) Y
VCC = 3.3 ± 0.3 V
Item Propagation delay time Symbol tPLH tPHL Ta = –40 to 85°C Min Max 1.5 1.8 4.6 5.5 Unit ns Test Conditions CL = 15 pF, RL = 1 MΩ CL = 50 pF, RL = 500 Ω FROM (Input) A TO (Output) Y
VCC = 5.0 ± 0.5 V
Item Propagation delay time Symbol tPLH tPHL Ta = –40 to 85°C Min Max 0.9 1.2 4.4 5.0 Unit ns Test Conditions CL = 15 pF, RL = 1 MΩ CL = 50 pF, RL = 500 Ω FROM (Input) A TO (Output) Y
Operating Characteristics
Item Symbol VCC (V) 1.8 2.5 3.3 5.0 Min — — — — Ta = 25°C Typ 16 18 18 20 Max — — — — Unit Test Conditions
Power dissipation capacitance
CPD
pF
f = 10 MHz
Test Circuit
Measurement point From Output
CL *
RL
Note: CL includes probe and jig capacitance.
Rev.1.00 Jul 26, 2006 page.