VN5012AK-E

www.DataSheet4U.com VN5012AK-E Single channel high side driver with analog current sense for automotive applications Features Max supply voltage Operating voltage range Max On-State resistance (per ch.) Current limitation (typ) Off state supply current (typ) 1. ■ Typical value with all loads connected VCC VCC RON ILIMH IS 41V 4.5 to 36V 12 mΩ 65 A 2 µA(1) PowerSSO-24 – Electrostatic discharge protection Application ■ General features – Inrush current active management by power limitation – Very low stand-by current – 3.0V CMOS compatible input – Optimized electromagnetic emission – Very low electromagnetic susceptibility – In compliance with the 2002/95/EC european directive Diagnostic functions – Proportional load current sense – High current sense precision for wide range currents – Current sense disable – Thermal shutdown indication – Very low current sense leakage Protections – Undervoltage shut-down – Overvoltage clamp – Load current limitation – Self limiting of fast thermal transients – Protection against loss of ground and loss of VCC – Thermal shut down – Reverse battery protection (see Figure 26) All types of resistive, inductive and capacitive loads Description The VN5012AK-E is a monolithic device made using STMicroelectronics VIPower M0-5 technology. It is intended for driving resistive or inductive loads with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table...