VN920SO-E

www.DataSheet4U.com VN920-E VN920B5-E / VN920SO-E HIGH SIDE DRIVER Table 1. General Features Type VN920-E VN920B5-E VN920SO-E RDS(on) 16mΩ IOUT 30 A VCC 36 V Figure 1. Package PENTAWATT CMOS COMPATIBLE INPUT s PROPORTIONAL LOAD CURRENT SENSE s SHORTED LOAD PROTECTION s UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN s OVERVOLTAGE CLAMP s THERMAL SHUTDOWN s CURRENT LIMITATION s PROTECTION AGAINST LOSS OF GROUND AND LOSS OF VCC s s s s P2PAK SO-16L VERY LOW STAND-BY POWER DISSIPATION REVERSE BATTERY PROTECTION (*) IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE Active current limitation combined with thermal shutdown and automatic restart protect the device against overload. The device integrates an analog current sense output which delivers a current proportional to the load current. Device automatically turns off in case of ground pin disconnection. DESCRIPTION The VN920-E, VN920B5-E, VN920SO-E is a monolithic device made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). Table 2. Order Codes Package PENTAWATT Tube Tape and Reel VN920-E VN920B5-E VN920SO-E VN920B5TR-E VN920SOTR-E - P PAK SO-16L Note: (*) See application schematic at page 9. 2 Rev. 1 October 2004 1/24 www.DataSheet4U.com VN920-E / VN920B5-E / VN920SO-E Figure 2. Block Diagram VCC VCC CLAMP OVERVOLTAGE DETE...