SPS-444

Ordering number : ENN6049 SPS-444 Series www.DataSheet4U.com SPS-444 Series Receiver Pre-amp Module for Infrared Remote Control Features This is an unified module consisting of a PIN photodiode and receiver pre-amp IC. It is a compact type, not necessary to mount outer part, and provides low voltage and low power consumption. It also puts a measure to inverter fluorescent lamp with a high frequency trap circuit for band-pass filter. It has leads at the both sides, so it is easy to put it on PCB. Absolute Maximum Ratings at Ta=25°C (as per JIS C 7032) Parameter Line Voltage Power Dissipation Operating Temperature Storage Temperature Soldering Temperature Symbol VCC PD Topr Tstg Tsol Rating 0 to +6.3 100 -10 to +60 -20 to +70 +260 *1 Unit V mW °C °C °C Recommended Operating Condition at Ta=25°C Parameter Symbol Opr. Condition Unit Line Voltage VCC +4.7 to +5.3 V We recommend the signal format with leader code (for example ; NEC format or Home Electrical Appliances Society format in Japan) for the remote control transmitter. Electrical / Optical Characteristics at Ta=25°C, VCC=5.0V D.C. Parameter Consumption Current Symbol ICC Condition Non-signal input *2 On axis *2 form device Cone with its limit inclined at 30 deg to axis Cone with its limit inclined at 40 deg to axis 2 * At the point of 30cm on axis *2 At the point of 30cm on axis *2 Specified by TWL time interval of output at the point of 30cm and 7.5m on axis *2 Specified by TWH time interval of output at the poin...