MXD7210ML

www.DataSheet4U.com Low Cost, Low Noise ±10 g Dual Axis Accelerometer with Digital Outputs MXD7210GL/HL/ML/NL FEATURES Low cost Resolution better than 1milli-g at 1Hz Dual axis accelerometer fabricated on a monolithic CMOS IC On chip mixed signal processing No moving parts; No loose particle issues >50,000 g shock survival rating 5mm X 5mm X 2mm LCC package 2.7V to 5.25V single supply continuous operation Compensated for Sensitivity over temperature Ultra low initial Zero-g Offset No adjustment needed outside APPLICATIONS Computer Peripherals Information Appliances Alarms and Motion Detectors Disk Drives Vehicle Security GENERAL DESCRIPTION The MXD7210GL/HL/ML/NL is a low cost, dual axis accelerometer fabricated on a standard, submicron CMOS process. It is a complete sensing system with on-chip mixed signal processing. The MXD7210GL/HL/ML/NL measures acceleration with a full-scale range of ±10 g and a sensitivity of 4%/g @5V. It can measure both dynamic acceleration (e.g. vibration) and static acceleration (e.g. gravity). The MXD7210GL/HL/ML/NL design is based on heat convection and requires no solid proof mass. This eliminates stiction and particle problems associated with competitive devices and provides shock survival greater than 50,000 g, leading to significantly lower failure rate and lower loss due to handling during assembly and at customer field application. Information furnished by MEMSIC is believed to be accurate and reliable. However, no responsibility is assum...