Intelligent Microcontroller Driven Dual Smartcard Reader IC
www.DataSheet4U.com
Rev. 1.2, Aug. 2000
_______________________________________________________________________________...
Description
www.DataSheet4U.com
Rev. 1.2, Aug. 2000
_____________________________________________________________________________________________
ML69240-C49
- Preliminary -
_____________________________________________________________________________________________
Intelligent Microcontroller Driven Dual Smartcard Reader IC
_____________________________________________________________________________________________
Designed and developed by Applied Card Technologies Ltd in association with Taiko Electronics
_____________________________________________________________________________________________
General Description
The ML69240-C49 can control two sockets for ISO7816-3 IC-cards. It is based on an 80C51type microcontroller-core. Multiple asynchronous and synchronous protocols are supported. In addition, other peripheral modules like keypad and LC-Display can be connected and controlled by ML69240-C49. Interfacing with the host is done via simple commands that are transferred over a RS232 serial port. Due to the simple structure of the command set and the full support of the peripheral components, the software and hardware design for a card reader system based on ML69240-C49 is easy to realise.
Features
Operating range Supply voltage Frequency Temperature Smartcard sockets +4.5~5.5 V 14.7456 MHz -40~+85°C 2 Jumper selectable ‘normally open’, ‘normally closed’ or ‘not present’ card detect switch Socket parameters dependent on type of socket used
Smartcard supported Asynchrono...
Similar Datasheet