A6219DS

A6219DS www.DataSheet4U.com Dual Full-Bridge PWM Motor Driver Features and Benefits ▪ Interchangeable with SGS L6219DS ▪ 750 mA Continuous Output Current ▪ 45 V Output Sustaining Voltage ▪ Internal Clamp Diodes ▪ Internal PWM Current Control ▪ Low Output Saturation Voltage ▪ Internal Thermal Shutdown Circuitry ▪ Similar to Dual PBL3717, UC3770 Description The L6219DS motor driver is designed to drive both windings of a bipolar stepper motor or bidirectionally control two DC motors. Both bridges are capable of sustaining 45 V and include internal pulse-width modulation (PWM) control of the output current to 750 mA. The outputs have been optimized for a low output saturation voltage drop (less than 1.8 V total source plus sink at 500 mA). For PWM current control, the maximum output current is determined by user selection of a reference voltage and sensing resistor. Two logic-level inputs select output current limits of 0, 33, 67, or 100% of the maximum level. A PHASE input to each bridge determines load current direction. The bridges include both ground clamp and flyback diodes for protection against inductive transients. Internally generated delays prevent crossover currents when switching current direction. Special power-up sequencing is not required. Thermal protection circuitry disables the outputs if the chip temperature exceeds safe operating limits. The L6219DS is supplied in a 24-pin surface-mountable SOIC, with 4 internally-fused leads for maximum package power dissi...