LTC4414

www.DataSheet4U.com LTC4414 FEATURES ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 36V, Low Loss PowerPathTM Controller for Large PFETs DESCRIPTIO The LTC®4414 controls an external P-channel MOSFET to create a near ideal diode function for power switchover. This permits highly efficient OR’ing of multiple power sources for extended battery life and low self- heating. When conducting, the voltage drop across the MOSFET is typically 20mV. For applications with a wall adapter or other auxiliary power source, the load is automatically disconnected from the battery when the auxiliary source is connected. Two or more LTC4414s may be interconnected to allow switchover between multiple batteries or charging of multiple batteries from a single charger. The wide supply operating range supports operation from one to eight Li-Ion cells in series. The low quiescent current (30µA typical) is independent of the load current. The gate driver includes an internal voltage clamp for MOSFET protection. The STAT pin can be used to enable an auxiliary P-channel MOSFET power switch when an auxiliary supply is detected. This pin may also be used to indicate to a microcontroller that an auxiliary supply is connected. The control (CTL) input enables the user to force the primary MOSFET off and the STAT pin low. The LTC4414 is available in a low profile 8-lead MSOP package. Designed Specifically to Drive Large QG PFETs Very Low Loss Replacement for Power Supply OR’ing Diodes 3.5V to 36V AC/DC Adapter Voltage Range Minimal...