LPO6013

Document 286-1 SMT Power Inductors - LPO6013 Series Very low profile – only 1.3 mm high! Handles saturating current up to 1.9 Amps Designer’s Kit C352 contains 3 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 111 – 122 mg Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7″reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.4 mm pocket depth Recommended pick and place nozzle OD: 5.6 mm; ID: ≤ 2.8 mm PCB washing Only pure water or alcohol recommended 1 www.DataSheet4U.com 2 Part number 1 L2 (µH) 1.0 1.5 2.2 3.3 3.9 ±20% ±20% ±20% ±20% ±20% 2 DCR SRF max typ 2Isat3 3Irms4 (Ohms) (MHz) (A) (A) 0.06 0.07 0.08 0.11 0.13 0.15 0.20 0.22 0.30 0.38 0.52 0.73 0.96 1.0 1.7 3.2 4.3 5.8 7 10 14 21 200 200 150 110 100 90 70 65 60 47 37 30 28 25 21 17 14 10 8 7 1.9 1.6 1.3 1.1 1.0 0.90 0.70 0.70 0.60 0.55 0.45 0.40 0.35 0...