MP802G

www.DataSheet4U.com MP8G SERIES GLASS PASSIVATED BRIDGE RECTIFIERS FEATURES ● Surge overload rating -175 amperes peak ● Low forward voltage drop ● Small size; simple installation ● Sliver plated copper leads ● Mounting position: Any REVERSE VOLTAGE FORWARD CURRENT MP8 - 50 to 1000Volts 8.0 Amperes METAL HEAT SINK .296(7.5) .255(6.5) .052(1.3) DIA. .048(1.2) .750 (19.0) MIN .770(19.6) .730(18.5) HOLE FOR NO.6 SCREW .520(13.2) .480(12.2) .770(19.6) .730(18.5) .520(13.2) .480(12.2) Polarity shown on side of case, Positive lead by beveled corner. Dimensions in inches and (milimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge Input Voltage Maximum Average Forward Rectified Output Current at Peak Forward Surage Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load Maximum Forward Voltage Drop Per Bridge Element at 4.0A Peak Maximum Reverse Current at Rated TA=25℃ DC Blocking Voltage Per Element Operating Temperature Range Storage Temperature Range Notes:1.Unit mounted on metal chassis 2. Unit mounted on P.C. board TA=100℃ Tc=100℃ (Note1) TA=40℃ (Note2) SYMBOL MP8005G MP801G MP802G MP804G MP806G MP808G MP810G VRRM VRMS I(AV) 50 30 100 70 200 140 400 280 8.0 3.0 175 600 420 800 560 1000 700 UNIT V V A IFSM A VF IR...