VNQ5160K-E

VNQ5160K-E Quad channel high side driver for automotive applications Features Max transient supply voltage VCC Operating voltage range VCC Max on-state resistance (per ch.) RON Current limitation (typ) ILIMH Off-state supply current IS 41V 4.5 to 36 V 160 m 5.4 A 2 A(1) PowerSSO-24 – Electrostatic discharge protection 1. Typical value with all loads connected ■ General features – Inrush current active management by power limitation – Very low standby current – 3.0 V CMOS compatible input – Optimized electromagnetic emission – Very low electromagnetic susceptibility – In compliance with the 2002/95/EC European directive ■ Diagnostic functions – Open drain status output – On-state open-load detection – Off-state open-load detection – Thermal shutdown indication ■ Protection – Undervoltage shutdown – Overvoltage clamp – Output stuck to VCC detection – Load current limitation – Self limiting of fast thermal transients – Protection against loss of ground and loss of VCC – Thermal shut down – Reverse battery protection (see Application schematic on page 18 Applications ■ All types of resistive, inductive and capacitive loads Description The VNQ5160K-E is a monolithic device made using STMicroelectronics VIPower™ M0-5 technology. It is intended for driving resistive or inductive loads with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). The device detects open-load ...