HIGH SIDE DRIVER
VN750-E / VN750S-E VN750PT-E / VN750B5-E
HIGH SIDE DRIVER
Table 1. General Features
Type VN750-E VN750B5-E VN750S-E VN75...
Description
VN750-E / VN750S-E VN750PT-E / VN750B5-E
HIGH SIDE DRIVER
Table 1. General Features
Type VN750-E VN750B5-E VN750S-E VN750PT RDS(on) 60 mΩ IOUT VCC
Figure 1. Package
6A
36 V
SO-8 CMOS COMPATIBLE INPUT ON STATE OPEN LOAD DETECTION s OFF STATE OPEN LOAD DETECTION s SHORTED LOAD PROTECTION s UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN s PROTECTION AGAINST LOSS OF GROUND s VERY LOW STAND-BY CURRENT
s s s s
PENTAWATT
P2PAK
PPAK
REVERSE BATTERY PROTECTION (*) IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE
DESCRIPTION The VN750-E, VN750S-E, VN750PT-E, VN750B5-E are a monolithic device designed in STMicroelectronics VIPower M0-3 Technology, www.DataSheet4U.com intended for driving any kind of load with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). Table 2. Order Codes
Package PENTAWATT SO-8 P PAK PPAK
Note: (*) See application schematic at page 9.
2
Active current limitation combined with thermal shutdown and automatic restart protect the device against overload. The device detects open load condition both is on and off state. Output shorted to VCC is detected in the off state. Device automatically turns off in case of ground pin disconnection.
Tube VN750-E VN750S-E VN750B5-E VN750PT-E -
Tape and Reel
VN750STR-E VN750B5TR-E VN750PTTR-E
Rev. 1 October 2004 1/31
VN750-E / VN750S-E / VN750PT-E / VN750B5-E
Figure 2. Block Diagram
VCC
VCC CLAMP
OVERVOLTAGE DETECTION UNDE...
Similar Datasheet