802.11a/b/g/n WLAN/Bluetooth FEIC
• 3% Dynamic EVM @ POUT = +18 dBm with IEEE 802.11a 64 QAM OFDM at 54 Mbps • 3% Dynamic EVM @ POUT = +20 dBm with IEEE...
Description
3% Dynamic EVM @ POUT = +18 dBm with IEEE 802.11a 64 QAM OFDM at 54 Mbps 3% Dynamic EVM @ POUT = +20 dBm with IEEE 802.11g 64 QAM OFDM at 54 Mbps -30 dBc 1st Sidelobe / -50 dBc 2nd Sidelobe at +23 dBm w/ IEEE 802.11b, 1 Mbps CCK/DSSS 31 dB of Linear Power Gain in 2 GHz and 5 GHz Transmit Paths 2.6 dB Noise Figure in 2 GHz Receive Path and 3.0 dB in 5 GHz Receive Path Single +3.3 V Nominal Supply SP3T RF Switch w/Bluetooth and 2 GHz Tx/Rx SP2T RF Switch for 5 GHz Tx/Rx Function Independent Switch Control for BT, 2 GHz, and 5 GHz Tx/Rx Paths 12 dB Gain in 2 GHz Receive Path and 14 dB in 5 GHz Receive Path LNA Bypass Mode in 2 GHz and 5 GHz Receive Paths 50 V - Matched RF Ports Leadfree Package Materials set consistent with RoHS Directive 4.0 x 4.0 x 0.55 mm QFN Package
FEATURES
PRELIMINARY DATA SHEET - Rev 1.0
802.11a/b/g/n WLAN/Bluetooth FEIC
AWL9966
AW L9
966
S36 Package 24 Pin 4 mm x 4 mm x 0.55 mm QFN
A single temperature-compensated power detector is used in the FEIC to serve both WLAN bands. The detector provides a single-ended output voltage with excellent accuracy over a wide range of operating temperatures. All circuits are biased by a single +3.3V supply and consume ultra-low current in the OFF mode.
APPLICATIONS www.DataSheet4U.com
802.11a/b/g/n WLAN for Fixed, Mobile, and Handheld applications The ANADIGICS AWL9966 is a high performance FEIC that incorporates dual band power amplifiers, low-noise amplifiers...
Similar Datasheet