1 Form A Solid State Relay
SP846-X
1 Form A Solid State Relay DESCRIPTION
The SP846-X is a bi-directional, single-pole, single-throw, normally open...
Description
SP846-X
1 Form A Solid State Relay DESCRIPTION
The SP846-X is a bi-directional, single-pole, single-throw, normally open multipurpose relay. The circuit is composed of one LED on the input side which activates an optically coupled IC on the output - controlling the firing angle of two back-to-back SCRs. This circuit assures no false triggering under most adverse conditions, and a tight zero-volt window not exceeding 5V. A 300-ohm input resistor in series with the LED is also provided in this circuit.
FEATURES
APPLICATIONS
Inverse parallel SCR output High transient immunity 700V blocking voltage 1.2A maximum continuous current Low input control current High input-to-output isolation Solid state reliability Zero-volt switching 300 ohm input resistor
Programmable controls Valve control Solenoids Remote switching Home appliances Metering equipment Heating elements Gas pump control circuitry
OPTIONS/SUFFIXES
MAXIMUM RATINGS
PARAMETER Storage Temperature Operating Temperature Continuous Input Current Transient Input Current Reverse Input Control Voltage Output Power Dissipation UNIT °C °C mA mA V W 6 1.2 MIN -55 -40 TYP MAX 120 85 40 400
-H -TR
High Output Isolation Tape and Reel
www.DataSheet4U.com SCHEMATIC DIAGRAM
APPROVALS
BABT CERTIFICATE #607837: BS EN 60950, BS EN 41003, BS EN 60065 UL FILE #E90096
rev 2.0 (9/24/04)
Solid State Optronics 1.888.377.4776 www.ssousa.com
SP846-X
1 Form A Solid State Relay
ELECTRICAL CH...
Similar Datasheet