MX29LV800CB

MX29LV800C T/B FEATURES 8M-BIT [1Mx8/512K x16] CMOS SINGLE VOLTAGE 3V ONLY FLASH MEMORY Ready/Busy# pin (RY/BY#) - Provides a hardware method of detecting program or erase operation completion Sector protection - Hardware method to disable any combination of sectors from program or erase operations - Temporary sector unprotected allows code changes in previously locked sectors. CFI (Common Flash Interface) compliant - Flash device parameters stored on the device and provide the host system to access 100,000 minimum erase/program cycles Latch-up protected to 100mA from -1V to VCC+1V Boot Sector Architecture - T = Top Boot Sector - B = Bottom Boot Sector Package type: - 44-pin SOP - 48-pin TSOP - 48-ball CSP (6 x 8mm) - 48-ball CSP (4 x 6mm) - All Pb-free devices are RoHS Compliant Compatibility with JEDEC standard - Pinout and software compatible with single-power supply Flash 10 years data retention Extended single - supply voltage range 2.7V to 3.6V 1,048,576 x 8/524,288 x 16 switchable Single power supply operation - 3.0V only operation for read, erase and program operation Fast access time: 45R/55R/70/90ns Low power consumption - 30mA maximum active current - 0.2uA typical standby current Command register architecture - Byte/word Programming (9us/11us typical) - Sector Erase (Sector structure 16K-Bytex1, 8K-Bytex2, 32K-Bytex1, and 64K-Byte x15) Fully compatible with MX29LV800BT/BB device Auto Erase (chip & sector) and Auto Program - Auto...