QECR1

QECR1 & QECR2 Characteristics: This style of relay is a tractive armature, dc current operated unit. It is specifically designed for use in lamp proving of 110VDC/33W triple pole signal lamps. Sensitivity is achieved through a large iron circuit. A slug is also fitted to cover the transit time of its control relay. The contacts are Silver impregnated Graphite to Silver (SIG/Sil). The relay conforms to BRB Spec 940A. The QECR2 is designed for use in lamp proving of 110VDC/12W LED signal lamps. SELECTRAIL A division of Selectrix Industries Pty Ltd TM Product range: Product code Rated amps dc 0.4 Contacts Coil resistance (ohms) 12.4 Max full Op. mA 220 Min Rel. mA 50 Interuption time ms at mA 100 150 QECR2-4841893 0.2 4F 4B 45.5 80 55 100 250 350 132 ABDHJ Interlocking QECR1-4841881 4F 4B CFKMX www.DataSheet4U.com Disclaimer: Selectrix Industries accepts no liability for the content of this document, or for the consequences of any actions taken on the basis of the information provided. Selectrix Industries reserves the right to alter information contained within this document without notice. © Selectrix Industries 2005 - All Rights Reserved www.selectrix.com QECR1 & QECR2 Contact Layout: Note: Layouts shown are when viewed from the rear of the relay. A 1 2 3 4 5 6 7 8 R1 R3 B C D SELECTRAIL A division of Selectrix Industries Pty Ltd TM F B F B F B F B C 4F 4B C R2 R4 www.DataSheet4U.com Enquiries: www.selectrix.com All enquires for further information shoul...