F980J475MMA

SOLID TANTALUM ELECTROLYTIC CAPACITORS F98 Resin-molded Chip, High Capacitance Series Adapted to the RoHS directive (2002/95/EC). Specifications Item Category Temperature Range Capacitance Tolerance Performance Characteristics -55 ~ +125°C (Rated temperature : 85°C) ± 20% (at 120Hz) Refer to the list below (* 1) After 5 minute's application of rated voltage, leakage current at 20°C is not more than 0.1CV or 0.5µA, whichever is greater. At 40°C, 90 ~ 95% R.H., For 500hours (No voltage applied) Capacitance Change Refor to the list below (* 1) Dissipation Factor 150% or less of initial specified value Leakage Current 200% or less of initial specified value At -55°C / +125°C, For 30 minutes each, 5 cycles Capacitance Change Refor to the list below (* 1) Dissipation Factor 150% or less of initial specified value Leakage Current Initial specified value or less At 260°C, For 10 seconds, Reflow, Capacitance Change Refor to the list below (* 1) Leakage Current Initial specified value or less Leakage Current Initial specified value or less After application of surge in series with a 1kΩ resistor at the rate of 30 seconds ON, 30 seconds OFF, for 1000 successive test cycles at 85°C, capacitors meet the characteristics requirements listed below. Refor to the list below (* 1) Capacitance Change Dissipation Factor 150% or less of initial specified value Leakage Current 200% or less of initial specified value After 1000 hours' application of rated voltage in series with a 3Ω resistor at...