4Mb (256K x 16) Pseudo Static RAM
ADVANCE INFORMATION
CG6258AM
4Mb (256K x 16) Pseudo Static RAM
Features
• Wide voltage range: 2.70V–3.30V • Access Tim...
Description
ADVANCE INFORMATION
CG6258AM
4Mb (256K x 16) Pseudo Static RAM
Features
Wide voltage range: 2.70V–3.30V Access Time: 70ns Ultra-low active power — Typical active current: 2.0mA @ f = 1 MHz — Typical active current: 13mA @ f = fmax Ultra low standby power Easy memory expansion with CE, CE2, and OE features Automatic power-down when deselected CMOS for optimum speed/power Offered in a 48 Ball BGA Package when deselected (CE HIGH or CE2 LOW or both BHE and BLE are HIGH). The input/output pins (I/O0 through I/O15) are placed in a high-impedance state when: deselected (CEHIGH or CE2 LOW), outputs are disabled (OE HIGH), both Byte High Enable and Byte Low Enable are disabled (BHE, BLE HIGH), or during a write operation (CE LOW, CE2 HIGH and WE LOW). The addresses must not be toggled once the read is started on the device. Writing to the device is accomplished by taking Chip Enables (CE LOW and CE2 HIGH) and Write Enable (WE) input LOW. If Byte Low Enable (BLE) is LOW, then data from I/O pins (I/O0 through I/O7), is written into the location specified on the address pins (A0 through A17). If Byte High Enable (BHE) is LOW, then data from I/O pins (I/O8 through I/O15) is written into the location specified on the address pins (A0 through A17). Reading from the device is accomplished by taking Chip Enables (CE LOW and CE2 HIGH) and Output Enable (OE) LOW while forcing the Write Enable (WE) HIGH. If Byte Low Enable (BLE) is LOW, then data from the memory location speci...
Similar Datasheet