WiMAX RF MxFE Transceiver
WiMAX RF MxFE Transceiver
AD9353
FEATURES
FUNCTIONAL BLOCK DIAGRAM
RF transceiver with integrated ADCs and DACs IEEE ...
Description
WiMAX RF MxFE Transceiver
AD9353
FEATURES
FUNCTIONAL BLOCK DIAGRAM
RF transceiver with integrated ADCs and DACs IEEE 802.16 WiMAX 3.3 GHz to 3.8 GHz 3.5 MHz < BW < 20 MHz
ADC
Rx
ADC
TxNRx
FILT FILT
DATA INTERFACE
Superior receiver sensitivity with NF 3.2 dB
Highly linear and spectrally pure transmitter Tx EVM: −36 dB SNR > 134 dB/Hz at fOFFSET > 22 MHz Tx power control Range: 0 dB to 58 dB
E Resolution: 0.25 dB
Autonomous AGC and Tx power control Automatic frequency correction < 0.012 ppm Integrated fractional-N synthesizer
T 8 Hz LO step size
Integrated phase noise < 0.8°rms
APPLICATIONS
E WiMAX/BWA
GENERAL DESCRIPTION
L The AD9353 is a fully integrated transceiver for IEEE 802.16
WiMAX wireless network systems. The RF MxFE® combines the RF front end with mixed-signal baseband enabling an easyto-use digital interface to the baseband ASIC or FPGA. The
O AD9353 operates in the 3.3 GHz to 3.8 GHz range covering
most of the licensed and unlicensed bands. Channel bandwidths of 3.5 MHz, 4.375 MHz, 5 MHz, 7 MHz, 8.75 MHz, 10 MHz, 14 MHz, 17.5 MHz, and 20 MHz are supported.
S The direct-conversion receiver has state-of-the-art noise figure
and linearity, and requires no external components with the exception of a balun. The complete RF subsystem integrates
B an autonomous AGC loop and dc offset corrections, thus
eliminating the need for high speed interaction with the baseband processor. The received signal strength indicator (RSSI) has over 80 dB of dynamic range with 0....
Similar Datasheet