3-Ch. Diff. Amplifier-comparator
3 CHANNEL DIFFERENTIAL AMPLIFIER-COMPARATOR
(Phototransistor input version of the standard ET9570)
ET9571
FEATURES
• •...
3 CHANNEL DIFFERENTIAL AMPLIFIER-COMPARATOR
(Photo
transistor input version of the standard ET9570)
ET9571
FEATURES
Supply Voltage Range 4.5V to 30V Designed for photo
transistor inputs Index channel gated by A and B Current sink for LED drive (see application note APP-D2) Outputs short circuit protected 25mA peak drive current
APPLICATIONS
Optical Encoders Industrial Controls
DESCRIPTION
These devices are specifically designed as receiver circuits for the photo
transistor signals available in some optical encoders. Connect the emitters of the photo
transistors to the input pins, with the collectors connected to Vcc. The inputs have 330 ohm resistors to terminate the photo
transistors in an emitter follower mode. Differential inputs enhance noise rejection and performance over temperature. Care should be taken to use photo
transistors on www.DataSheet4U.com differential input pairs which have similar values of DC leakage current, as large differences in this charactersitic will affect waveform symmetry.
ABSOLUTE MAXIMUM RATINGS
Parameter Operating Temperature Range Supply Voltage Range Symbol TA VCC Min. -40 4.5 Max. 125 30 Units °C V Ref. Note 1
ETIC RESERVES THE RIGHT TO MAKE CHANGES AT ANY TIME TO IMPROVE THE DESIGN AND TO SUPPLY THE BEST PRODUCT.
©2000, Rev A1 iC-Haus GmbH Integrated Circuits Am Kuemmerling 18, D-55294 Bodenheim Page 1 of 2 Tel +49-6135-9292-0 Fax +49-6135-9292-192 http://www.ichaus.com
ELECTRICAL CHARACTERISTICS
Unless otherwise specifie...