HIGH SIDE DRIVER
VN820-E / VN820B5-E VN820PT-E / VN820SO-E / VN820SP-E
HIGH SIDE DRIVER
Table 1. General Features
Type VN820-E VN820B5-E ...
Description
VN820-E / VN820B5-E VN820PT-E / VN820SO-E / VN820SP-E
HIGH SIDE DRIVER
Table 1. General Features
Type VN820-E VN820B5-E VN820PT-E VN820SO-E VN820SP-E RDS(on) IOUT VCC
Figure 1. Package
40 mΩ
9A
36 V
10
1
PowerSO-10™
P2PAK
PPAK
CMOS COMPATIBLE INPUT ON STATE OPEN LOAD DETECTION ■ OFF STATE OPEN LOAD DETECTION ■ SHORTED LOAD PROTECTION ■ UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN ■ PROTECTION AGAINST LOSS OF GROUND ■ VERY LOW STAND-BY CURRENT
■ ■ ■ ■
PENTAWATT
SO-16L
REVERSE BATTERY PROTECTION (*) IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE
DESCRIPTION The VN820-E, VN820SP-E, VN820B5-E, VN820SO-E, VN820PT-E are monolithic devices www.DataSheet4U.com made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. Active V CC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). Table 2. Order Codes
Package PENTAWATT PowerSO-10™ P2PAK SO-16L PPAK
Note: (*) See application schematic at page 9.
Active current limitation combined with thermal shutdown and automatic restart protect the device against overload. The device detects open load condition both is on and off state. Output shorted to V CC is detected in the off state. Device automatically turns off in case of ground pin disconnection.
Tube VN820-E VN820SP-E VN820B5-E VN820SO-E VN820PT-E -
Tape and Reel
VN820SPTR-E VN820-B5TR-E VN820SOTR-E VN820PTTR-E
Rev. 3 February 2005 1/38
VN820-...
Similar Datasheet