Half-brick DC-DC Converter
Technical Specification
IQ24500HZx10
18-36 V
Input
Output
50 V
Current
10 A
2250 Vdc
Isolation
DC-DC Converter
Ha...
Description
Technical Specification
IQ24500HZx10
18-36 V
Input
Output
50 V
Current
10 A
2250 Vdc
Isolation
DC-DC Converter
Half-brick
The IQ24500HZx10 InQor® Zeta converter is an isolated, fixed switching frequency DC-DC converter that uses synchronous rectification to achieve extremely high efficiency and power density. The 24 Vin modules feature 2,250 Vdc isolation and low common mode noise. The Zeta series converters offer industry leading useable output power for any standard “half-brick” module. RoHS compliant (see last page). Operational Features
Ultra-high efficiency, 94% at full rated load current, 95% at half rated load current Delivers up to 10 A of output current (500 W) Wide input voltage range: 18 – 36 V, with 50 V 100 ms input voltage transient capability Fixed frequency switching provides predictable EMI performance No minimum load requirement means no preload resistors required Wide output voltage trim range (-50% to +10%), see trim section
IQ24500HZC10 Module
www.DataSheet4U.com
Protection Features
Input under-voltage lockout disables converter at low input voltage conditions Output current limit and short circuit protection protects converter and load from damage and consequent hazardous conditions Active back bias limit provides smooth startup with external load induced pre-bias Latching output over-voltage protection protects load from damaging voltages Thermal shutdown protects converter from abnormal environmenta...
Similar Datasheet