FRM5J141GT

InGaAs-APD/Preamp Receiver FEATURES Board mount type “GT” package: 17 pins InGaAs-PIN with pre-amplifier Integrated Design Optimizes Performance at Bit Rates up to 10.7Gb/s Electrical Differential Output High Sensitivity: -19.0dBm Operating Case Temperature: -5°C to 75°C FRM5J141GT APPLICATIONS This APD with preamplifier is intended to function as an optical receiver at 1,310nm or 1,530-1,610nm in SONET, SDH, DWDM or other optical fiber systems operating up to 10.7Gb/s. The typical transimpedance (Zt) value of 1,200Ω optimizes the total bandwidth for 10Gb/s application. The detector preamplifier is DC coupled and has an electrical differential output. DESCRIPTION The FRM5J141GT incorporates a high bandwidth InGaAs PIN photo diode, a GaAs amplifier in a hermetically sealed board mount type package. The PIN is processed with modern epitaxial techniques resulting in a reliable performance over a wide range of operating conditions. ABSOLUTE MAXIMUM RATINGS (Tc=25°C, unless otherwise specified) Ratings Parameter www.DataSheet4U.com Symbol Min. -40 Max. +85 Unit Storage Temperature Tstg °C Operating Temperature Top -5 +75 °C Supply Voltage Vss -6 0 V PIN Reverse Voltage VR 0 20 V PIN Reverse Current IR - 4(peak) mA Edition 1.1 July 2004 1 FRM5J141GT Parameter PIN Responsivity Symbol R Zt Vclip Test Conditions λ = 1,310nm, M=1 λ = 1,550nm, M=1 λ = 1,620nm, M=1 f = 750MHz, Single-end InGaAs-APD/Preamp Receiver Limits Typ. 0.95 1.00 0.85 ...