MP04HB910

MP04HB910 Replaces February 2001, version DS5425-1.2 FEATURES s Dual Device Module s Electrically Isolated Package s Pressure Contact Construction s International Standard Footprint s Alumina (Non-toxic) Isolation Medium APPLICATIONS s Power Supplies s Large IGBT Circuit 'Front Ends' s Rectifiers s Battery Chargers VOLTAGE RATINGS Type Number MP04HB910-30 MP04HB910-28 MP04HB910-26 MP04HB910-24 Repetitive Peak Voltages VRRM V 3000 2800 2600 2400 Conditions Tvj = –40˚ to 150˚C, VRSM = VRRM + 100V Lower voltage grades available MP04HB910 Dual Rectifier Diode Module Preliminary Information DS5425-1.3 July 2001 KEY PARAMETERS VRRM IF(AV) IFSM (per arm) IF(RMS) Visol 3000V 915A 20000A 1440A 3000V 1 2 3 Fig.1 HB circuit configuration ORDERING INFORMATION Order As: MP04HB910-XX XX shown in the part number about represents VRRM/100 selection required. Note: When ordering, please use the complete part number. Please quote full part number in all correspondance. www.dynexsemi.com Outline type code: MP04 (See package details for further information) Fig. 2 Electrical connections - (not to scale) 1/7 MP04HB910 ABSOLUTE MAXIMUM RATINGS - PER ARM Stresses above those listed under 'Absolute Maximum Ratings' may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to Absolute Maximum Ratings f...