DatasheetsPDF.com

LH1298 Dataheets PDF



Part Number LH1298
Manufacturers Siemens Semiconductor Group
Logo Siemens Semiconductor Group
Description HIGH VOLTAGE/ SOLID STATE RELAY OPTOCOUPLER
Datasheet LH1298 DatasheetLH1298 Datasheet (PDF)

LH1298 HIGH VOLTAGE, SOLID STATE RELAY OPTOCOUPLER FEATURES • Normally Closed, Single Pole Single Throw Operation • Control 350 VAC or DC Voltage • Switch 100 mA Loads • LED Control Current, 1.5 mA • Low ON-Resistance • dv/dt, >500 V/ms • Isolation Test Voltage, 3750 VACRMS • Current Limiting • Underwriters Lab File # E52744 APPLICATIONS • Telephone Switch Hook • High Voltage Test Equipment • TRIAC Driver • Motor Control • Industrial Control Systems DESCRIPTION The LH1298 is a single pole single.

  LH1298   LH1298


Document
LH1298 HIGH VOLTAGE, SOLID STATE RELAY OPTOCOUPLER FEATURES • Normally Closed, Single Pole Single Throw Operation • Control 350 VAC or DC Voltage • Switch 100 mA Loads • LED Control Current, 1.5 mA • Low ON-Resistance • dv/dt, >500 V/ms • Isolation Test Voltage, 3750 VACRMS • Current Limiting • Underwriters Lab File # E52744 APPLICATIONS • Telephone Switch Hook • High Voltage Test Equipment • TRIAC Driver • Motor Control • Industrial Control Systems DESCRIPTION The LH1298 is a single pole single throw (SPST), normally closed (NC), solid state relay. The relay can control AC or DC loads currents up to 100 mA, with a supply voltage up to 350 V. The device is packaged in a six pin 0.3 inch dual-in line package. This package offers an insulation dielectric withstand of 3750 VACRMS. The coupler consists of a AlGaAs LED that is optically coupled to a dielectrically isolated monolithic integrated circuit. The IC chip consists of a photodiode array, control circuitry and high voltage DMOS transistors. The typical ON resistance between the output terminals is 30 Ω at 0 mA LED current. The switch offers low off-state leakage current at LED current of 5 mA or greater. There is on board output current limiting circuitry. Maximum Ratings Terminal Voltage .................................................. 350 V Terminal Current ............................................... 100 mA LED Forward Current.......................................... 60 mA LED Reverse Current............................................ 6 mA Isolation Test Voltage.............................. 3750 VACRMS Isolation Resistance VIO=500 V, TA=25°C .................................... ≥1012 Ω VIO=500 V, TA=100°C ...................................≥1011 W Operating Temperature Range................ –40 to +85°C Storage Temperature Range ................. –40 to +150°C Lead Soldering Temperature at 260°C, 2 mm from case.............................. 5 sec. Package Dimensions in Inches (mm) Pin One ID. 3 .248 (6.30) .256 (6.50) 4 5 6 NC 2 1 A K 1 2 6 5 S NC 3 4 .335 (8.50) .343 (8.70) .039 (1.00) Min. 4° Typ. .018 (0.45) .022 (0.55) S' .300 (7.62) Typ. .130 (3.30) .150 (3.81) 18° Typ. .020 (.051) Min. .031 (0.80) .035 (0.90) .100 (2.54) Typ. .010 (.25) .014 (.35) .300 (7.62) .347 (8.82) .110 (2.79) .150 (3.81) Characteristics (TA=25°C) Emitter Forward Voltage VF Temperature Coefficient Reverse Current Junction Capacitance Dynamic Resistance Switching Time Detector Output Breakdown Voltage VB 350 0.1 0.1 Terminal Capacitance Current Limit Package LED Forward Current, Turn-Off ON-resistance Turn-on Time Turn-off Time IFth 1.5 2.5 mA VL=± 300 V, TA=25°C IT=± 25 mA, IF=0 mA IF=5 mA, VL=50 V, RL=1 kΩ CT 24 150 1 5 V µA µA pF mA IB=50 µA VT=100 V, IF=5 mA VT=300 V, IF=2.5 mA VT=0, f= MHz Sym VF ∆VF/∆TA IR CJ ∆VF/∆IF tR, tF Min. Typ. 1.25 –2.2 1 15 6 1 10 Max. 1.5 Units V mV/°C µA pF W µs VR=6 V VR=0 V f=1 MHz IF=10 mA IF=10 mA Condition IF=10 mA Output OFF-State IT(OFF) Leakage Current RON TON TOFF 20 30 50 3 2 W ms ms 5–201 .


LH1061AB LH1298 LH1301-2R


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)