Document
Embedded Power for Business-Critical Continuity
SMT10E Series
3.0 - 5.5 Vin
Rev.3.4.09_90 SMT10E_05 Series of 4
Total Power: 13.2 Watts Input Voltage: 3.0 - 5.5 Vdc # of Outputs: Single
Electrical Specifications
Special Features
• • • • • • • • • • • 10 A current rating Input voltage range: 3.0 Vdc to 5.5 Vdc Output voltage range: 0.8 Vdc to 3.63 Vdc Ultra high efficiency: 96% @ 5 Vin and 3.3 Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of >7 million hours per Telcordia SR-332 Ideal solution where board space is at a premium or tighter card pitch is required Industry standard surface-mount footprint Available RoHS compliant 2 year warranty
Input
Input voltage range: Input current: Input current (max.): Input current ripple: Remote ON/OFF: Start-up time: No load 3.0-5.5 Vdc 70 mA typ. 8 A max. @ lo max. and Vout = 3.63 V 110 mA rms (See Note 2) 20 ms Fixed output versions Wide trim version ±10% 0.8 - 3.63 Vdc ±0.4% ±0.2% ±1.0% 0A None 0 to 20 mHz BW 50 mV pk-pk 25 mV rms max. ±0.01%/˚C 60 mV max. deviation 50µs recovery to within ±1.0% 10% Vo compensation
Output
Voltage adjustability: (See Note 1) Setpoint accuracy: Line regulation: Load regulation: Minimum load: Overshoot/Undershoot: Ripple and noise:
Safety
• • • UL/cUL CAN/CSA 22.2 No. E186249 TÜV Product Service (EN60950) Certificate No. B 08 05 51485 378 CB report and certificate to DE3-51686M1
Temperature co-efficient: Transient response: Remote sense:
All specifications are typical at 5 Vin and 3.3 Vout, full load at 25 °C unless otherwise stated.
Embedded Power for Business-Critical Continuity
Rev.3.4.09_90 SMT10E_05 Series of 4
EMC Characteristics
Electrostatic discharge: Conducted immunity: Radiated immunity: EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3
General Specifications
Efficiency: Insulation voltage: Switching frequency: Approvals and standards: Material flammability: Dimensions Weight: Coplanarity: MTBF: Telcordia SR-332 MIL-HDBK-217F (L x W x H) Fixed See table Non-isolated 300 kHz typ. EN60950 UL/cUL60950 UL94V-0 33.02 x 13.46 x 8.21 mm 1.3 x 0.53 x 0.323 inches 6.3 g (0.22 oz) 100 µm 7,042,000 hours 680,000 hours
Environmental Specifications
Thermal performance: (See Note 3) Operating ambient temperature Non-operating -40° C to +100 °C -40 °C to +125 °C
Protection
Short circuit: Thermal: Continuous Automatic recovery
Embedded Power for Business-Critical Continuity
Ordering Information
All specifications are typical at 5 Vin and 3.3 Vout, full load at 25 °C unless otherwise stated.
Rev.3.4.09_90 SMT10E_05 Series of 4
Ordering Information
Output Power (Max.) 13.2 W 16.5 W 19.8 W 27.5 W 36.3 W 36.3 W Input Voltage 3.0 - 5.5 Vdc 3.0 - 5.5 Vdc 3.0 - 5.5 Vdc 3.0 - 5.5 Vdc 4.5 - 5.5 Vdc 3.0 - 5.5 Vdc Output Voltage 1.2 Vdc 1.5 Vdc 1.8 Vdc 2.5 Vdc 3.3 Vdc 0.8 - 3.63 Vdc Output Currents Min 0A 0A 0A 0A 0A 0A Max 10 A 10 A 10 A 10 A 10 A 10 A Efficiency (typ.) 89% 90% .