DatasheetsPDF.com

NAN40-7615-01J Dataheets PDF



Part Number NAN40-7615-01J
Manufacturers Emerson
Logo Emerson
Description AC-DC / 10W - 85 W
Datasheet NAN40-7615-01J DatasheetNAN40-7615-01J Datasheet (PDF)

NAL40 and NAN40 SERIES Single, dual and triple output • • • • • • • 5.0 x 3.0 x 1.2 inch package (1U applications) Ideal for high volume designs Industry standard package Overvoltage and short circuit protection 40W with free air convection NAN40: EN55022, EN55011 conducted emissions level B NAL40: EN55022, EN55011 conducted emissions level A [ 2 YEAR WARRANTY ] The NAL40 and NAN40 series are 40W universal input AC/DC power supplies on a 5 x 3 inch card with a maximum component height of 1.2 i.

  NAN40-7615-01J   NAN40-7615-01J


Document
NAL40 and NAN40 SERIES Single, dual and triple output • • • • • • • 5.0 x 3.0 x 1.2 inch package (1U applications) Ideal for high volume designs Industry standard package Overvoltage and short circuit protection 40W with free air convection NAN40: EN55022, EN55011 conducted emissions level B NAL40: EN55022, EN55011 conducted emissions level A [ 2 YEAR WARRANTY ] The NAL40 and NAN40 series are 40W universal input AC/DC power supplies on a 5 x 3 inch card with a maximum component height of 1.2 inch for use in 1U applications. These series are available with a wide range of models in the industry standard 5 x 3 inch footprint at low cost making the series ideal for new and existing high volume communication and industrial applications. The difference between the NAL40 and NAN40 is their conducted emissions performance - the NAN40 meets EN55022 level B while the NAL40 meets level A. The NAL40 and NAN40 provide 40W of output power with free air convection cooling with a peak output of 50W for a maximum duration of 60 seconds. The NAL40 and NAN40 series are designed for use in high volume low power data networking, computer and telecom applications such as hubs, routers, POS terminals, cable modems and PABX's. This list is not exclusive as the generic feature set of both series with industry standard output configurations provide a solution for most high volume applications including many industrial applications. SPECIFICATION OUTPUT SPECIFICATIONS Line regulation Total regulation Overshoot/undershoot Transient response Temperature coefficient Overvoltage protection Output power limit Short circuit protection All specifications are typical at nominal input, full load at 25°C unless otherwise stated EMC CHARACTERISTICS ±0.5% ±1.0% ±3.0% ±5.0% <10% ±150mV max. dev., 500µs recovery ±0.02%/°C Hold-up time Conducted emissions Conducted emissions Radiated emissions ESD air ESD contact Surge Fast transients Radiated immunity Conducted immunity NAL: EN55022, FCC part 15 NAN: EN55022, FCC part 15 EN55022, FCC part 15 EN61000-4-2, level 3 Perf. EN61000-4-2, level 4 Perf. EN61000-4-5, level 3 Perf. EN61000-4-4, level 3 Perf. EN61000-4-3, level 3 Perf. EN61000-4-6, level 3 Perf. level A level B level A criteria 2 criteria 2 criteria 2 criteria 2 criteria 2 criteria 2 Main output Auxiliary outputs Main output Auxiliary outputs At turn-on +5.1V (1.5A to 3A step) GENERAL SPECIFICATIONS +5.1V output Primary power limited Multiple output Single 12V, 15V, 24V and 48V NAN40-7662 only 6.25V ±0.75Vout 50W Pout, min. 110W Pin, max. 30 seconds Continuous automatic recovery ±5% (See Note 10) Efficiency Isolation voltage Switching frequency Approvals and standards (See Note 9) Weight MTBF MIL-HDBK-217F Input/output Input/chassis 110VAC 230VAC 10ms @ 40W 60ms @ 40W 68% min. @ 40W 3000VAC 1500VAC Variable VDE0805, EN60950, IEC950 BABT, IEC1010, UL1950 CSA C22.2 No. 950 200g (7.06oz) 150,000 Hours Output voltage trim INPUT SPECIFICATIONS Input voltage range Input frequency range Input surge current Safety ground leakage current 110VAC, cold start 230VAC, cold start 110VAC, 60Hz 230VAC, 50Hz Universal input 90 to 264VAC 120 to 370VDC 47Hz to 440Hz 15A 32A 0.2mA 0.4mA ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating 0°C to +70°C Non-operating -40°C to +85°C 0°C to 50°C ambient, 40W convection cooled 50°C to 70°C, Derate linearly ambient conv. cooled to half load Peak (0°C to 50°C) max. 60s 50W Non-condensing Operating Non operating 5% to 95% RH 10,000 feet max. 30,000 feet max. International Safety Standard Approvals VDE0805/EN60950/IEC950/IEC1010 File No. 10401-3336-1076 Licence No. 70567, 1076 and 90354 UL1950 File No. E136005 CSA C22.2 No. 950 File No. LR41062C Certificate No. PS/605108 Relative humidity Altitude Vibration Three orthogonal axes, 2.4G rms random vibration, 10 5Hz to 500Hz minute test for each axis PAGE 22 Data Sheet © Artesyn Technologies® 2001 LOW TO MEDIUM POWER AC/DC POWER SUPPLIES | 40W AC/DC 40 Watt AC/DC universal input switch mode power supplies OUTPUT VOLTAGE + 5.1V (IA) +12V (IB) MAX 3A 2A (1) OUTPUT CURRENT PEAK 7A 3A (2) FAN 4A 2A (3) RIPPLE 50mV (4) TOTAL REG. (5) MODEL NUMBER NAL40-7608 (5) (B) ±3.0% ±5.0% NAN40-7608 NAN40-7662 (5) (10) 120mV –12V (IC) +5.1V +12V –12V +5.1V (IA) +12V (IB) –5V (IC) +5.1V (IA) +15V (IB) –15V (IC) +5.1V (IA) +12V (IB) 5V 12V 15V 24V 48V Notes 1 2 0.35A 3A 0.35A 0.35A 3A 2A 0.35A 3A 1.5A 0.35A 3A 2A 6A 3.3A 2.6A 1.6A 0.8A 1A 7A 3A 1A 7A 3A 1.0A 7A 3A 1A 7A 3A 10A 5A 4A 2.5A 1A 0.5A 4A 0.5A 0.5A 4A 2A 0.5A 4A 1.5A 0.5A 4A 2A 8A 4A 3.3A 2A 1A 120mV 45mV 110mV 110mV 50mV 120mV 50mV 50mV 160mV 150mV 50mV 120mV 50mV 120mV 150mV 240mV 480mV Mechanical notes ±5.0% ±3.0% ±5.0% ±5.0% ±3.0% ±5.0% ±5.0% ±3.0% +13% –0% ±5.0% ±3.0% ±5.0% ±3.0% ±3.0% ±3.0% ±3.0% ±3.0% NAL40-7605 NAL40-7612 NAL40-7615 NAL40-7624 NAL40-7617 NAN40-7605 NAN40-7612 NAN40-7615 NAN40-7624 NAN40-7617 NAL40-7629 (5) NAL40-7628 (8) NAN40-7628 (8) 1 NAL40-7607 (5) NAN40.


NAN40-7615-01 NAN40-7615-01J NFS110-7601J


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)