DatasheetsPDF.com

LPQ112-B Dataheets PDF



Part Number LPQ112-B
Manufacturers Emerson
Logo Emerson
Description AC-DC / 86W - 135W
Datasheet LPQ112-B DatasheetLPQ112-B Datasheet (PDF)

110 Watts LPQ110 Series Total Power: 80-110 Watts Input Voltage: 85-264 VAC 120-300 VDC # of Outputs: Quad Electrical Specs Input Input range Frequency Inrush current Input current Efficiency EMI filter 85-264 VAC 120-300 VDC 47-440 Hz <18 A peak @ 115 VAC; <36 A peak @ 230 VAC, cold start @ 25°C 2.5 A max. (RMS) @ 115 VAC 70% typical at full load FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted <0.5 mA @ 50/60 Hz, 264 VAC input Specia.

  LPQ112-B   LPQ112-B



Document
110 Watts LPQ110 Series Total Power: 80-110 Watts Input Voltage: 85-264 VAC 120-300 VDC # of Outputs: Quad Electrical Specs Input Input range Frequency Inrush current Input current Efficiency EMI filter 85-264 VAC 120-300 VDC 47-440 Hz <18 A peak @ 115 VAC; <36 A peak @ 230 VAC, cold start @ 25°C 2.5 A max. (RMS) @ 115 VAC 70% typical at full load FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted <0.5 mA @ 50/60 Hz, 264 VAC input Special Features • • • • • • • • • Universal input High efficiency Remote sense on main output Built-in EMI filter Low output ripple Adjustable 5 V output Overvoltage protection Overload protection Adjustable floating 4th output (On LPQ112 and LPQ113) • Power fail • Optional L bracket (-B suffix) • Cover kit available LPX110-C Safety ground leakage current Output Maximum power Adjustment range Cross regulation Hold-up time Overload protection Overvoltage protection 80 W for convection; 110 W with 30 CFM forced air ±5% min. on main; 5-25 V on 4th output on LPQ112 and LPQ113 ±2% on output 1; ±3% on outputs 2, 3 & 4 20 ms @ 80 W load, 115 VAC nominal line Short circuit protection on all outputs. Case overload protected @ 110-145% above peak rating 5.7-6.7 VDC on main output. Latching type, recycle AC to reset. Environmental Operating temperature: 0° to 50°C ambient derate each output at 2.5% per degree from 50° to 70°C Electromagnetic susceptibility: Designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3 Humidity: Operating; non-condensing 5% to 95% Vibration: Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75 G peak 5 Hz to 500 Hz, operational Storage temperature: -40° to 85°C Temperature coefficient: ±.04% per °C MTBF demonstrated: >550,000 hours at full load and 25°C ambient conditions Logic Control Power Failure Remote sense TTL logic signal goes high 50-150 msec after 5 V output. It goes low at least 4 msec before loss of regulation. Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected. Electrical Specs VDE UL CSA NEMKO CB CE 0805/EN60950 (IEC950) UL1950 CSA 22.2-234 Level 3 EN 60950/EMKO-TUE (74-sec) 203 Certificate and report Mark (LVD) 11774-3336-1245 (LC #84997) E132002 LR53982C P94102464 1423, 1424, 1425 rev 12.10.03 102 Technical Support: (888) 41-ASTEC or (407) 241-2752 Americas: (760) 930-4600 Europe (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662 AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 ASIA Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 LPQ110 Series Ordering Information Model Number LPQ112 Output Voltage 5V 12 V -12 V ±5-25 V 5V 15 V -15 V ±5-25 V 5V 12 V -12 V 24 V Minimum Load 2A 0A 0A 0A 2A 0A 0A 0A 2A 0A 0A 0.5 A Maximum Load with Convection Cooling 9A 4.5 A 0.7 A 2.5 A 9A 4.5 A 0.7 A 2.5 A 9A 4.5 A 0.7 A 3.5 A Maximum Load with 30 CFM Forced Air 11 A 5A 1.0 A 3A 11 A 5A 1.0 A 3A 11 A 5A 1.0 A 4.5 A Peak Load1 15 A 9A 1.5 A 3.5 A 15 A 9A 1.5 A 3.5 A 15 A 9A 1.5 A 5A Regulation2 ±2% ±3% ±5% ±3% ±2% ±3% ±5% ±3% ±2% ±3% ±5% +10 / -5% Ripple P/P (PARD)3 50 mV 120 mV 120 mV 240 mV, max. 50 mV 150 mV 150 mV 240 mV, max. 50 mV 120 mV 120 mV 240 mV LPQ113 LPQ114 1. Peak current lasting <30 seconds with a maximum 10% duty cycle. 2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 4. 4th O/P adjustable 5 to 25 V, factory set at 5 V. 5. Minimum loads are required. Note: -B suffix added to model number indicates L bracket option. -B Bracket Pin Assignments Connector LPQ112 SK1-1 SK1-3 SK1-5 SK2-1 SK2-2 SK2-3 SK2-4 SK2-5 SK2-6 SK2-7 SK2-8 SK2-9 SK2-10 SK2-11 SK2-12 SK201-1 SK201-2 SK202-1 SK202-2 GND Neutral Line +5 V +5 V +5 V Common Common Common Common +12 V +12 V -12 V +5-25 V -5-25 V +sense -sense POK GND LPQ113 GND Neutral Line +5 V +5 V +5 V Common Common Common Common +15 V +15 V -15 V +5-25 V -5-25 V +sense -sense POK GND LPQ114 GND Neutral Line +5 V +5 V +5 V Common Common Common Common +12 V +12 V -12 V +24 V Common +sense -sense POK GND 4.28" (108.6) 2.5" (63.5) #6-32 PEM 6 places 6.4" (162.6) 7.3" (185.5) 2.2" (56) 0.86" (21.8) 5.9" (150.0) Mating Connectors AC Input: Molex 09-50-8051 (USA) 09-91-0500 (UK) PINS: 08-58-0111 DC Outputs: Molex 09-50-8121 (USA) 09-91-1200 (UK) PINS: 08-58-0111 Remote sense/Power fail: Molex 22-01-1022 (USA) 22-01-1023 (UK) PINS: 08-50-0114 Astec Connector Kit #70-841-008, includes all of the above. Notes: 1. Specifications subject to change without notice. 2. All dimensions in.


LPQ112 LPQ112-B LPQ113


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)