FSUSB45

FSUSB45 — Hi-Speed USB2.0 (480Mbps) Switch with Dedicated Charger Port Detect July 2013 FSUSB45 — High-Speed USB2.0 (480Mbps) Switch with Dedicated Charger Port Detect Features  Low On Capacitance: 7.0 pF Typical  Low On Resistance: 3.9 Ω Typical  Low Power Consumption: 1 μA Maximum - 15 μA Maximum ICCT over an Expanded Voltage Range (VIN=1.8 V, VCC=4.3 V)  Wide -3 db Bandwidth: > 720 MHz  Packaged in: - 10-Lead MicroPak™ (1.6 x 2.1 mm) - 10-Lead UMLP (1.4 x 1.8 mm)  8 kV ESD Rating, >16 kV Power/GND ESD Rating  Power-Off Protection on All Ports When VCC=0 V - D+/D- Pins Tolerate up to 5.25 V Applications  Cell Phone, PDA, Digital Camera, and Notebook  LCD Monitor, TV, and Set-Top Box IMPORTANT NOTE: For additional performance information, please contact [email protected]. Description The FSUSB45 is a bi-directional, low-power, two-port, High-Speed, USB2.0 switch. Configured as a doublepole, double-throw (DPDT) switch, it is optimized for switching between two HS (480 Mbps) sources or an HS source and a Full-Speed (12 Mbps) source. The FSUSB45 is compatible with the requirements of USB2.0 and features an extremely low on capacitance (CON) of 7.0 pF. The wide bandwidth of this device (720 MHz) exceeds the bandwidth needed to pass the third harmonic, resulting in signals with minimum edge and phase distortion. Superior channel-to-channel crosstalk also minimizes interference. The FSUSB45 contains special circuitry on the switch I/O pins for application...